TOTX1353(F) Toshiba

TOTX1353(F) FIBER OPTIC TRANSMITTING MODULE TOTX1353(F) GENERAL PURPOSE OPTICAL TRANSMITTING MODULE JIS F05 type fiber optic connector 650nm LED Low current LED drive 1. Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Storage Temperature T 40 to 95 C stg Operating Temperature T 40 to 85 C opr Forward Current (DC) I 30 mA FDC Soldering Temperature T 260 (Note 1) C sol Note 1: Soldering time 10 s (More than 1 mm apart from the package). Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/ current/ voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/ Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2. Operating Ranges Characteristics Symbol MinTyp.MaxUnit Forward Current (DC) I 1.5 10 mA F Data Rate DC - 500 kb/s Start of commercial production 2013/02 1 2014-05-20 TOTX1353(F) 3. Electrical and Optical Characteristics (Ta = 25C, V = 5 V) CC Characteristics Symbol Test Condition Min Typ. MaxUnit Data Rate NRZ Code DC - 500 kb / s Transmission Distance (Note 2) Using APF(Note 3) and TORX1353(F) 0.2 10 m Pulse Width Distortion (Note 4) tw -30 30 % Fiber Output Power (Note 5) P I = 1.5mA, Using APF (Note3), -17 -12 dBm f F Center Emission Wavelength c 650 nm Forward Voltage V I = 1.5mA V 1.75 2.2 F F Note 2: Data rate and transmission distance differ from driver curcuit. Note 3: All Plastic Fiber (980m core / 1000m cladding, NA=0.5) with optical connector. Polished surface. Note 4: Between input of driver circuit of TOTX1353(F) and output of TORX1353(F). A value changes with LED drive circuits. Note 5: Measure with a standard optical fiber with fiber optic connectors. Valued by peak. 4. Application Circuit 5. Applicable Optical Fiber with Fiber Optic Connectors All Plastic Fiber (980m core / 1000m cladding ), NA=0.5 F05 type optical connector with polished surface. 2 2014-05-20