MAL218297701E3

182 CPHZ www.vishay.com Vishay BCcomponents Hybrid Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 10 000 h at 105 C Very low ESR and high ripple current High voltages up to 80 V SMD-version with base plate, lead (Pb)-free reflow solderable Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS higher 182 CPHZ 183 CPHT Industrial and professional applications 105 C 125 C temperature Telecommunications and IT Fig. 1 Portable and mobile equipment MARKING QUICK REFERENCE DATA Rated capacitance (in F) DESCRIPTION VALUE Nominal case sizes 5.0 x 5.0 x 5.8 Rated voltage (in V) (L x W x H in mm) to 10.0 x 10.0 x 10.5 Date code, in accordance with IEC 60062 Rated capacitance range, C 10 F to 330 F R Black mark or - sign indicating the cathode (the anode is Tolerance on C 20 % R identified by beveled edges) Rated voltage range, U 25 V to 80 V R Code indicating group number (82) Category temperature range -55 C to +105 C Endurance test at 105 C 10 000 h PACKAGING Useful life at 105 C 10 000 h Supplied in blister tape on reel Shelf life at 0 V, 105 C 1000 h Based on sectional IEC 60384-25 / CECC 32300 specification Climatic category IEC 60068 55 / 105 / 56 SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) R R U (V) C R R (F) 25 35 50 63 80 10 5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 - 22 5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 27 6.3 x 6.3 x 5.8 - - - 33 5.0 x 5.0 x 5.8 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5 47 6.3 x 6.3 x 5.8 - - - 56 6.3 x 6.3 x 5.8 10.0 x 10.0 x 10.5 - 68 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5 - 100 6.3 x 6.3 x 7.7 10.0 x 10.0 x 10.5 - - 150 8.0 x 8.0 x 10.5 - - - 220 8.0 x 8.0 x 10.5 - - - - 270 10.0 x 10.0 x 10.5 - - - 330 10.0 x 10.0 x 10.5 - - - - Revision: 04-Feb-2021 Document Number: 28433 1 For technical questions, contact: aluminumcaps1 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000VISHAY 39 63V 82H5 182 CPHZ www.vishay.com Vishay BCcomponents 2-pin: W H MAX. MAX. B MAX. 0.3 Negative polarity L1 L D S MAX. MAX. Fig. 2 - Dimensional outline Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE CASE MASS L W H D B SL1 MAX. MAX. MAX. MAX. MAX. L x W x H CODE (g) 5.0 x 5.0 x 5.8 0506 5.5 5.5 6.1 5.0 0.8 1.4 6.1 0.2 6.3 x 6.3 x 5.8 0606 6.7 6.7 6.1 6.3 0.8 2.2 7.4 0.3 6.3 x 6.3 x 7.7 0608 6.7 6.7 8.0 6.3 0.8 2.2 7.4 0.4 8.0 x 8.0 x 10.5 0810 8.5 8.5 10.8 8.0 1.1 3.1 9.2 0.9 10.0 x 10.0 x 10.5 1010 10.5 10.5 10.8 10.0 1.1 4.5 11.2 1.2 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES TAPE PACKAGING NOMINAL CASE SIZE CASE PITCH TAPE WIDTH THICKNESS REEL DIAMETER QUANTITY L x W x H CODE P W 1 T PER REEL 2 5.0 x 5.0 x 5.8 0506 12 12 6.1 380 1000 6.3 x 6.3 x 5.8 0606 12 16 5.7 380 1000 6.3 x 6.3 x 7.7 0608 12 16 8.0 380 900 8.0 x 8.0 x 10.5 0810 16 24 11.0 380 500 10.0 x 10.0 x 10.5 1010 16 24 11.0 380 500 MOUNTING SOLDERING The capacitors are designed for automatic placement on to Soldering conditions are defined by the curve, temperatur e printed-circuit boards. versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print For maximum conditions refer to Fig. 4. layout and / or adjacent components. Any temperature versus time curve which does not exceed For recommended soldering pad dimensions, refer to Fig. 3 the specified maximum curves may be applied. and Table 3. As a general principle, temperature and duration shall be the minimum necessary required to ensure good solderin g connections. However, the specified maximum curves should never be exceeded. Revision: 04-Feb-2021 Document Number: 28433 2 For technical questions, contact: aluminumcaps1 vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 min. 0.4 / max. 1.0 (2 x)