VLHW5100 www.vishay.com Vishay Semiconductors Ultrabright White LED, 5 mm Untinted Non-Diffused Package FEATURES Untinted non-diffused lens Utilizing ultrabright InGaN technology High luminous intensity Luminous intensity and color categorized for each packing unit ESD-withstand voltage: up to 4 kV according to JESD22-A114-B 19223 Circuit protection by Zener diode DESCRIPTION Material categorization: for definitions of The VLHW5100 is a clear, non-diffused 5 mm LED for high compliance please see www.vishay.com/doc 99912 end applications where supreme luminous intensity APPLICATIONS required. These lamps with clear untinted plastic case utilize the Interior and exterior lighting highly developed ultrabright InGaN technologies. Outdoor LED panels The lens and the viewing angle is optimized to achieve best Instrumentation and front panel indicators performance of light output and visibility. Replaces incandescent lamps Light guide compatible PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 5 mm Product series: standard Angle of half intensity: 10 PARTS TABLE LUMINOUS INTENSITY COORDINATE FORWARD VOLTAGE at I at I at I F F F (mcd) (x, y) (V) PART COLOR TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. 0.33, InGaN and VLHW5100 White 5600 - 11 200 20 - -20 2.8 - 3.6 20 0.33 converter ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb VLHW5100 PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage V 5V R DC forward current I 30 mA F Peak forward current at 1 kHz, t /T = 0.1 I 0.1 A p FSM Power dissipation P 100 mW V Zener reverse current I 100 mA Z Junction temperature T 100 C j Operating temperature range T -40 to +100 C amb Storage temperature range T -40 to +100 C stg Soldering temperature t 5 s T 260 C sd Thermal resistance junction-to-ambient R 400 K/W thJA Rev. 1.3, 20-May-2019 Document Number: 81159 1 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VLHW5100 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb WHITE VLHW5100 PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity I = 20 mA VLHW5100 I 5600 - 11 200 mcd F V Chromaticity coordinate x I = 20 mA x - 0.33 - F acc. to CIE 1931 Chromaticity coordinate y I = 20 mA y - 0.33 - F acc. to CIE 1931 Angle of half intensity I = 20 mA - 10 - F Forward voltage I = 20 mA V 2.8 - 3.6 V F F Reverse current V = 5 V I - - 50 A R R Temperature coefficient of V I = 20 mA TC --4 - mV/K F F VF Temperature coefficient of I I = 20 mA TC --0.5 - % / K V F IV CHROMATICITY COORDINATED CLASSIFICATION X Y GROUP MIN. MAX. MIN. MAX. 3A 0.2900 0.3025 y = 1.4x - 0.121 y = 1.4x - 0.071 3B 0.3025 0.3150 y = 1.4x - 0.121 y = 1.4x - 0.071 3C 0.2900 0.3025 y = 1.4x - 0.171 y = 1.4x - 0.121 3D 0.3025 0.3150 y = 1.4x - 0.171 y = 1.4x - 0.121 4A 0.3150 0.3275 y = 1.4x - 0.121 y = 1.4x - 0.071 4B 0.3275 0.3400 y = 1.4x - 0.121 y = 1.4x - 0.071 4C 0.3150 0.3275 y = 1.4x - 0.171 y = 1.4x - 0.121 4D 0.3275 0.3400 y = 1.4x - 0.171 y = 1.4x - 0.121 5A 0.3400 0.3525 y = 1.4x - 0.121 y = 1.4x - 0.071 5B 0.3525 0.3650 y = 1.4x - 0.121 y = 1.4x - 0.071 5C 0.3400 0.3525 y = 1.4x - 0.171 y = 1.4x - 0.121 5D 0.3525 0.3650 y = 1.4x - 0.171 y = 1.4x - 0.121 Note Chromaticity coordinate groups are tested with a tolerance of 0.01 LUMINOUS INTENSITY CLASSIFICATION FORWARD VOLTAGE CLASSIFICATION GROUP LIGHT INTENSITY (mcd) FORWARD VOLTAGE (V) GROUP STANDARD MIN. MAX. MIN. MAX. DB 5600 7100 02.8 3.0 EA 7100 9000 13.0 3.2 EB 9000 11 200 23.2 3.4 Note 33.4 3.6 Luminous intensity is tested with an accuracy of 11 %. Note The above type numbers represent the order groups which Forward voltage is tested with an accuracy of 0.1 V include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightnes s groups will not be orderable. In a similar manner for colors where color groups are measured and binned, single color groups will be shipped on any one reel. In order to ensure availability, single color groups will not be orderable Rev. 1.3, 20-May-2019 Document Number: 81159 2 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000