E15TS-06

Incremental E-15 Encoder FEATURES 3 or 6 pulses per revolution (standard). SMD or Through-hole Mount. Working Temperature Range (-40C to +120C). Low Profile (4.4 mm). Embossed Tape (SMD) or Bulk packaging (Through hole). Reflow Soldering capability. Shaft insertable from both sides. Polarised rotor (European Home Appliance standard). All PT/ PTC 15 shafts compatible. IP54 protection according to IEC 60529. STANDARD SPECIFICATIONS TYPICAL APPLICATIONS The N-15 potentiometer/sensor series has been expanded to Closed Contact Resistance: < 5W incorporate both encoders and rotary switches in the same package Open Contact Resistance: > 10MW Contact Current: 10A 100mA configuration allowing the user to design in any one of the three Operating Voltage: 16 VDC (3 pulse) options whilst keeping the same board layout and user interface. 13.50.2 VDC (6 pulse) The extended temperature range (-40C to +120C) allows the Number of pulses 3 or 6 encoder to be employed in extreme environmental applications where Mechanical Life: 36K cycles (3 pulse) other encoders currently on the market can not be used. This in 10K (6 pulse) combination with optional SMD or through-hole mounting makes the Rotational Torque: <2Ncm E-15 series ideal for Automotive Heating, Ventilation & Air conditioning, Mechanical rotation angle: 360 (endless) Temperature Range: -40C to +120C Oven & Microwave (White and Brown goods in general), Kitchen Appliance and Power Tool Controls. GRAPH CODE TERMINAL DESIGNATIONS 3 pulse version 6 pulse version S A E Bit Generator Viewed from (rotary) mounting side HOW TO ORDER E15 T S 03 - Mounting Method Series Rotors Pulses E-15 T 03 V =Through Hole S = SMD 06 H = Horizontal Adjust (See note 1) NOTES: (1) Horizontal adjust versions will be studied case by case Shafts are not available mounted to the encoder and should be ordered separately Please note that the features and specifications of custom products are to be used as general guidelines only -14- www.piher.netHOW TO ORDER CUSTOM DRAWING STANDARD WIPER POSITION 50% 10 (Max. 16 digits) E-15 T S + DRAWING NUMBER This way of ordering should be used for options which are not included in theHow to orde standard and optional extras. SMD VERSION SOLDER MASK FOOT - PRINT THROUGH HOLE VERSION SOLDER MASK DATE CODE PCB HOLE LAYOUT -15- www.piher.net