Product Information

FLUKE 820-2

FLUKE 820-2 electronic component of Fluke

Datasheet
Stroboscope lamp; Display: LCD; Range:30÷300000fpm; 0÷45°C

Manufacturer: Fluke
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 1754.7347 ea
Line Total: USD 1754.7347

1 - Global Stock
Ships to you between
Thu. 04 Apr to Wed. 10 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
1 - Global Stock


Ships to you between Thu. 04 Apr to Wed. 10 Apr

MOQ : 1
Multiples : 1
1 : USD 1747.2408

     
Manufacturer
Product Category
Kind Of Display Used
Measuring Range
Measurement Accuracy
Type Of Device
Weight With Battery
Body Dimensions
Operating Temperature
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
1273185 electronic component of Fluke 1273185

HEAVY DUTY TEST LEAD SET
Stock : 1

1547885 electronic component of Fluke 1547885

Fluke METER CASE,LEATHER,LARGE
Stock : 1

1576734 electronic component of Fluke 1576734

Fluke FLUKEVIEW FORMS WITH CABLE FOR USE WITH 18X, 28X DMMS
Stock : 1

1610115 electronic component of Fluke 1610115

AC280 Suregrip Hook Clips
Stock : 0

1LAC-A electronic component of Fluke 1LAC-A

LOW VOLTAGE DETECTOR AMERICAS PACIFIC AVAILABLE IN 12 PA
Stock : 0

114519 electronic component of Fluke 114519

AC/DC CURRENT PROBE, SCOPEMETER(R)
Stock : 1

1503 electronic component of Fluke 1503

Insulation Resistance Testers
Stock : 0

1630 electronic component of Fluke 1630

Fluke 1630 Earth Ground Clamp Meter
Stock : 1

190-102/AM electronic component of Fluke 190-102/AM

Oscilloscope (DSO) + DMM - 2 Ch, 100 MHz -- 6" Color TFT LCD -- 8 bit, 1.25Gs/S Portable Scopemeter® ...
Stock : 1

1623-2-KIT electronic component of Fluke 1623-2-KIT

Basic GEO Earth Ground Tester Kit
Stock : 1

Image Description
7211 495 electronic component of Altech 7211 495

Screws & Fasteners NPT3/8 LOCKNUT PA BK
Stock : 1

1233890 electronic component of Bossard 1233890

Screw; M4x10; DIN:912; Head: cheese head; imbus; HEX 3 mm
Stock : 800

9426 electronic component of Keystone 9426

Keystone Electronics Screws & Fasteners 1 12" 10-32 STEEL
Stock : 1

9538 electronic component of Keystone 9538

Screws & Fasteners 3/4 6-32 NYLON FLT
Stock : 0

3176 electronic component of Keystone 3176

Screws & Fasteners .437 Flat NYL Wshr .047 Width, #10
Stock : 1

1411205 electronic component of Phoenix Contact 1411205

Screws & Fasteners A-INL-M12-P-GY
Stock : 10000

Hot P2442 electronic component of Switchcraft P2442

Screws & Fasteners PHENOLIC FLAT WASHER
Stock : 2

1537237 electronic component of Bossard 1537237

Screw; M6x10; DIN:965A; Head: countersunk; Pozidriv; steel; zinc
Stock : 0

1537288 electronic component of Bossard 1537288

Screw; M6x25; DIN:965A; Head: countersunk; Pozidriv; steel; zinc
Stock : 0

1004387 electronic component of Bossard 1004387

Screw; M6x35; DIN:912; Head: cheese head; imbus; steel; zinc
Stock : 400

Fluke 820-2 LED Stroboscope Technical Data Rugged, compact and easy-to-use Investigate and observe potential mechanism failure with confi- dence on a variety of machinery, in a wide range of industries, without making physical contact with the machine. The Fluke 820-2 LED Stroboscope is a rugged, compact, portable strobe ideal for stop motion diagnostics, mechanical troubleshooting, and process or product research and development. The Fluke 820-2 LED Stroboscope is a simple, easy to Adjustable flash duration use tool to stop motion for measurement and diagnos- For most applications the standard tic purposes allowing you to: flash duration will work well with- Identify the running speed of rotating equipment out adjustment. In other applications without stopping the operation or making contact with higher rpm or larger rotating with machinery objects with high surface speeds, an Stop motion for diagnoses of parasitic oscillations, adjustable flash duration is needed. In flaws, slippage or unwanted distortions high speed applications, objects may move during the brief period of a single Measure speed of rotation or frequency of a rotating flash, resulting in a blurred image. By shaft, speaker, or mechanical part decreasing flash duration, objects have Identify part numbers or other markings less time to move and the image will appear sharper. Key features: Common applications High intensity 7-LED array4,800 Lux 6,000 FPM/30cm for the 820-2 The Fluke 820-2 LED Stroboscope is more than just a High efficiency LED solid-state light source with tool to measure rotational speed of machinery without uniform flash characteristics allow for higher flash physical contact. It is also an excellent diagnostic tool rates30-300,000 FPM (flashes per minute) for a wide variety of applications: Digital pulse width modulation for exceptionally Belt driven machinesHVAC fans, pumps sharp images at high speeds Roller bearings, shafts, gear teeth or other machine Rugged, durable design utilizes solid-state LEDs components with no filaments, gases, hollow cavities, or Clutches and cogwheels glass(one meter drop) Foundationsresonance vibrations Quartz-accuracy control system provides high accuracy0.02 % ( 1 digit) Cable or piping wear or damage Multi-line LCD display Mixing and dosage processes Check the rotating speed of machinery without In addition, the stroboscope can be used as a strobe physical contact or need for reflective tape tachometer to measure speed instead of using a laser tachometer. In order to use the stroboscope, the com- Advance or retard flash timing for viewing gear ponent under measure must be visible, and have an teeth, cutting surfaces, repeats, or drifting identifying mark that can be used as a point of refer- equipment. ence. A strobe tachometer is a useful tool because you Simple push button operation with 2x and 2 cant always get access to the machine shaft to stick buttons for easy adjustment a piece of reflective tape to use a laser tachometer or make contact with the moving shaft to use a contact tachometerusing a stroboscope you can stop the shaft down to 30 RPM (FPM). Use the 820-2 LED for: Turbines that vary in speed and change speed frequently Variable Frequency Drive motors that vary in speed, but do not change frequently Find belt rotation speed and look for belt slippage Find machine element componentsfan blades, pump vanes, compressor screws, and gear teeth. RPM measurement and frequency investigation Slip measurement Use the Fluke 820-2 LED Stroboscope in a variety of industries: Electronics/electrical engineering Automotive and motor manufacturing Observe the anchor swing from synchronic and Adjust the ignition and the valves. Check the valve asynchronous motors, carbon brush of the collec- lever movement, valve spring vibration, and injec- tors and sliding rings. Find mistakes on speakers, tion operations in combustion engines. Control of record players, magnetic tape recorder, relay, the various work processes in manufacturing of contact rectifiers, power switch, phone selector, automatic and machines all of kinds. home appliances, kitchen equipment, ventila- Observe the vibration of motors, hangers, transmis- tors, turbines, vibrators, counters, speakerphones, sion shafts, springs, wind generators, and light sorting-machines, centrifuges, electrical tools and machines. equipment. Find errors caused by work process on manufac- Optics manufacturing turing machineswrappers, cabling machines, Test camera closures. Control transport of film cam- isolated machines, wireless printing machines, eras and projectors. Observe the drive elements, cutting machines and drill machines. cooling fan, and the return flow of movie projec- tors. Investigate the work process on lens-grinding Control the synchronization of motors and machines. machines as well as their leakage and tarnish behavior. Check the behavior of motors, machines, Perform movement studies seen in the fast move- and drives for power drain. Identify material stress ment of objects through film recordings. as well as fatigue by wave motion reverberations at higher machine efficiency. Print, paper, and cardboard manufacturing Observe the passer marks and control the print- Machine construction ing process. Watch multicolor printers in order to Investigate meshing of gears, control of drives, ball assess the print quality relative to the rate. bearings, couplings, lever movement, linkages, Check on package machines, folding box automa- cylinders, valve clip tongue and valve clip leverage, tion, cutting automation and adhesive automation. resonance vibrations, and early detection of fatigue Control the work process of the punching, printing, of the material from high load. and sorting automation. Control the rotary knives, Control the work process on high-speed machines. waltz, transport rollers, gears, stores, waves, etc. Check the compliance of rotational parts of motors, machine and manufacturing equipment, and the Mining behavior of couplings, belts and chain-drives at Observe shiver and swinging filters, transport high speeds. bands, and centrifuges. Control the generators, Observe the work processes of centrifuges, pres- drive machines, rock drills and other mechanical sure/cut machines, automatic punching, riveting equipment. machines, screwing machines, grinding machines, Shipbuilding, aircraft construction polishing machines and boring machines. Observe the automatic moving processes and play of Determine the appearance of cavitation bubbles machines and mechanical equipment that is out- on propellers at experimental models. Control side what can be seen by the human eye. the movement in marine engines, generators, E-machines, and air systems. Observe the behavior of propellers and air screws at different rpm (drew behavior and fluid behavior). 2 Fluke Corporation Fluke 820-2 LED Stroboscope

Tariff Desc

7415 Nails, tacks, drawing pins, staples (other than those of 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper:
7415.33.00 --Screws; bolts and nuts
FLUKE CALIBRATION
Fluke Electronics
FLUKE NETWORKS

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted