ANT7-T-ST25DV04K

ANT7-T-ST25DV04K Data brief 14 mm x 14 mm antenna reference board for the ST25DV04K dual interface EEPROM Features Ready to use printed circuit board including: ST25DV04K dual interface EEPROM 14 mm x 14 mm, 13.56 MHz dual layer etched antenna I2C test points RF event configurable general purpose output (GPO) Analog energy harvesting (EH) output Description The ANT7-T-ST25DV04K antenna reference board is a ready-to-use PCB that features an ST25DV04K dual interface EEPROM connected to a 14 mm x 14 mm, 13.56 MHz etched RF double layer antenna on one side, and to an I2C bus on the other side. This demonstration board allows system designers to evaluate the ST25DV04K performance and capabilities, and to get started with their design. To demonstrate the energy harvesting function the ANT7-T-ST25DV04K can be used in conjunction with the ST DEMO-CR95HF-A board. The board design and the Gerber files can be downloaded from www.st.com. If externally powered, supply has to be safety extra-low voltage (SELV) according to EN60950-1 (< 5 V, < 15 W). The power supply shall be classified ES1 (electrical energy source class 1), PS1 (electrical power source class 1) according to EN62368-1. Reference Order code ANT7-T- ST25DV04KIER6S3 Figure 1. Functional block diagram ST25DV04K VCC 14 mm X 14 mm Antenna loop EH GPO ST25DV04K SDA SCL GND DB3677 - Rev 2 - September 2018 www.st.com For further information contact your local STMicroelectronics sales office.ANT7-T-ST25DV04K Revision history Table 1. Document revision history Date Version Changes 10-Jul-2018 1 Initial release. 27-Sep-2018 2 Updated Features and Description. DB3677 - Rev 2 page 2/6