B-CAMS-OMV

B-CAMS-OMV Data brief Camera module bundle for STM32 boards Features Camera module adapter board (MB1683) 1 30 pin ZIF connector and extended GPIO connector for easy connection to compatible STM32 boards STMicroelectronics camera module (MB1379) connector OpenMV camera module connector Waveshare camera board connector 3.3 V power STMicroelectronics camera module (MB1379) Based on the OV5640 image sensor offering a 5-Mpixel resolution with 8-bit color Flexible flat cable (FFC) Description The camera module bundle (B-CAMS-OMV) provides extension connectors for the B-CAMS-OMV top view without FFC. MB1379 STMicroelectronics camera module daughterboard or third-party modules Picture is not contractual. like OpenMV and Waveshare modules. It can be used with the STM32 boards featuring a 1 30 pin ZIF connector for the connection of multiple cameras to implement computer vision on STM32 microcontrollers easily. The camera module bundle is compatible with all STM32 Discovery kits and Evaluation boards featuring a ZIF connector, such as the STM32H747I-DISCO and Product status link 32L4R9IDISCOVERY Discovery kits. B-CAMS-OMV DB4303 - Rev 1 - December 2020 www.st.com For further information contact your local STMicroelectronics sales office.B-CAMS-OMV Ordering information 1 Ordering information To order the B-CAMS-OMV camera module bundle, refer to Table 1. Table 1. Ordering information Order code Content and references User manual Target STM32 boards STM32H747I-DISCO (1) MB1683 32L4R9IDISCOVERY (2) B-CAMS-OMV MB1379 UM2779 STM32 boards featuring a 1 30 pin ZIF (3) FFC connector 1. Camera module adapter board. 2. STMicroelectronics camera module mounted on MB1683. 3. Flexible flat cable. The STM32 Discovery kits and Evaluation boards feature STM32 32-bit microcontrollers based on the Arm Cortex processor. Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere. 1.1 Product marking The sticker located on the top or bottom side of the PCB shows the information about product identification such as board reference, revision, and serial number. The first identification line has the following format: MBxxxx-Variant-yzz, where MBxxxx is the board reference, Variant (optional) identifies the mounting variant when several exist, is the PCB revision andz is the assembly revision, for example B01. The second identification line is the board serial number used for traceability. Evaluation tools marked as ES or E are not yet qualified and therefore not ready to be used as reference design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will be liable for any customer usage of these engineering sample tools as reference designs or in production. E or ES marking examples of location: On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the STM32 datasheet Package information paragraph at the www.st.com website). Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board. DB4303 - Rev 1 page 2/5