Product Information

VERSIL406

VERSIL406 electronic component of Amphenol

Datasheet
Sensor Fixings & Accessories Epoxy, Versilox, A-Paks, 406 / ACC. #17, enough for approx. 5-7 bases

Manufacturer: Amphenol
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 49.035 ea
Line Total: USD 49.035

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock


Ships to you between Thu. 11 Apr to Mon. 15 Apr

MOQ : 1
Multiples : 1

Stock Image

VERSIL406
Amphenol

1 : USD 38.7741
50 : USD 35.6111
100 : USD 35.3668
250 : USD 35.2081
500 : USD 34.4876
1000 : USD 33.7915

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Product
Type
Size
Container
Brand
Product Type
Subcategory
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
000-46650-93RFX electronic component of Amphenol 000-46650-93RFX

RF Connector Accessory - BNC Resistor Terminated Plug 1 Watt 5% 93 Ohms
Stock : 1

000-7925-RFX electronic component of Amphenol 000-7925-RFX

Adapter, Twinax Jack to Twina
Stock : 1

000-49000 electronic component of Amphenol 000-49000

RF Connectors / Coaxial Connectors 4H FLANGE JCK S/CUP
Stock : 1

000-5575 electronic component of Amphenol 000-5575

RF Connectors / Coaxial Connectors BNC FRONT MOUNT REC UG-625/U
Stock : 88

000-78800 electronic component of Amphenol 000-78800

Conn Type N-TNC Adapter PL/F 0Hz to 11GHz ST
Stock : 63

0.5 INCH-G-4V electronic component of Amphenol 0.5 INCH-G-4V

Board Mount Pressure Sensors 0.5" Gauge 4.5-5.5VDC supply
Stock : 0

00111820202 electronic component of Amphenol 00111820202

Terminal Junction Modules MODULE DE MASSE #20
Stock : 1

00111510202 electronic component of Amphenol 00111510202

Socket Junction Modules MODULE #22 Waterproof
Stock : 1

0.5INCH-D1-4V-MINI electronic component of Amphenol 0.5INCH-D1-4V-MINI

Board Mount Pressure Sensors MAMP Mini Low Press Amplified
Stock : 0

00326117359 electronic component of Amphenol 00326117359

Junction System Tools & Accessories BRACKET, RIGHT M2-15
Stock : 0

Image Description
CMS-R-FLUID-TR electronic component of Phoenix Contact CMS-R-FLUID-TR

Cleaning fluid, 30 ml cleaning fluid for CMS-INK-TR-C5
Stock : 1

10439 electronic component of Desco 10439

Chemicals REZTORE SURFACE/MAT CLEANER 16 oz SPRAY
Stock : 1

832B-375ML electronic component of MG Chemicals 832B-375ML

Epoxy Adhesives Two Compound 2:1 Black 3.3Pa.s 5.3e12Ohm.cm 8250PSI
Stock : 0

834FX-450ML electronic component of Metz 834FX-450ML

CHEMICAL, POTTING COMPOUND, 450ML; Potting Compound Type:Epoxy; Dispensing Method:Bottle; Compound Colour:Black; Weight:0.94kg; Product Range:834FX Series; SVHC:No SVHC (27-Jun-2018); Volume:450ml
Stock : 0

834HTC-900ML electronic component of Metz 834HTC-900ML

CHEMICAL, POTTING COMPOUND, 900ML; Potting Compound Type:Epoxy; Dispensing Method:Can; Compound Colour:Black; Weight:1.93kg; Product Range:834HTC Series; SVHC:No SVHC (27-Jun-2018); Volume:900ml
Stock : 0

48-1/2X520 electronic component of 3M 48-1/2X520

Tapes Single Side Adhesive White PTFE Film 13.2m
Stock : 0

9223 electronic component of 3M 9223

Chemicals SCTCH-WLD HTMLT APPL PG II VALVE ASSY KIT
Stock : 1

9945 electronic component of 3M 9945

Chemicals HOT MELT APPLICATOR HEAVY DUTY BENCH STAND
Stock : 0

834ATH-375ML electronic component of MG Chemicals 834ATH-375ML

Chemicals Epoxy - Black, Flame Retardant Potting and Encapsulating Compound, UL 94V-0 (FILE # E334302).
Stock : 0

421A-500ML electronic component of MG Chemicals 421A-500ML

Chemicals Liquid Tin
Stock : 0

Mounting hardware and accessoriesMounting considerations Surface Wilcoxons rugged sensors are designed to operate continuously in harsh industrial environments. Consideration of mount- ing surface and wiring requirements will ensure optimal performance of the sensor throughout the lifetime of the machinery being monitored. The accuracy of high frequency signals is dependent on how direct and rigid the contact is between the sensor and the machine. Adequately preparing the mounting surface provides the best performance and output of reliable data ensuring an accurate assessment of machine condition. Tips: Mount sensors in a location that minimizes the vibration transmission route from the driving point source of vibration (shaft) through the machine to the sensor Avoid mounting the sensor on thin sections, guards or vibration-free areas (antinodes), or areas with extreme temperature variations Use a silicon grease to increase the performance of permanently mounted sensors Frequency range The mounting location of each sensor should be based on the characteristics of the machinery to be monitored. The dynamic measurement requirements of frequency and amplitude range should be evaluated against the frequency range of the desired type of measurement. Each mounting method has a different effect on an sensors operating frequency range. Accelerometers have a natural resonance 3 to 5 times higher than the data sheet specified upper-end frequency response. The goal of measurement is to utilize the flat portion of the frequency response (the portion between the upper and lower 3 dB limit) for the best characterization of vibration levels. To ensure optimal response, careful attention should be made to the contact surface area and the proximity to the actual source of the vibration. 1 2 3 4 5 6 Curved Cementing Probe Flat surface Adhesive mounting Stud tip magnet magnet pad 500 -1,000 2,000 - 5,000 10,000- 30,000- Max sensor Frequency (Hz) 10,000 Hz Hz Hz 15,000 Hz 45,000 Hz response Acceptable Good Best Mounting options Permanent mounting: stud, cementing pad Stud mounting offers the widest and most accurate frequency dynamic measurement range and is highly recommended for permanent monitoring systems, high frequency testing such as gearbox monitoring and harsh environments. Cementing pads approach the high frequency capabilities of stud mounts when used properly, without the need of drilling into the structure. They are often used in applications where multiple locations will be measured using a single sensor. Mounting pads can also be used when multiple sensors are mounted for short periods of time, and directly epoxying the sensor is not practical. Adhesive mounting If the machine cannot be drilled or surface quality is poor, adhesives provide a secure attachment and are the next best alternative to epoxied mounting. The sensors operational frequency range will be reduced because the adhesive acts as a shock absorber, introducing a lower resonance than stud mounting. Replacement or removal of adhesive mounted sensors is the most difficult compared to any other mounting method. Temporary mounting: magnets and probe tips Magnets and probe tips used with sensors and data collectors are best when be used for walkaround monitoring programs. The frequency range of both methods is dramatically reduced compared to stud or adhesive mounts, but is still adequate for general purpose machine monitoring. Care must be used when interpreting data to account for resonance from mounting. Relative sensitivity (dB) Freqency range

Tariff Desc

3403 Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing as basic constituents, 70% or more by weight of petroleum oils or of oils obtained from bituminous minerals:
3403.1 -Containing petroleum oils or oils obtained from bituminous minerals:
3403.11 --Preparations for the treatment of textile materials, leather, furskins or other materials:
3403.11.10 ---In solid or semi-solid form 0.0%
3403.11.90 ---Other 0.0%
3814.00.00 Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers: 5.0%
3818.00.00 Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics 0.0%
3506 Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg:
3506.10.00 -Products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg 5.0%
AHT
ALDEN
All Sensors
All Sensors Corporation
AMC
Amphenol
Amphenol Matrix
Amphenol SV Microwave
Amphenol / InterCon Systems
Amphenol / Matrix
Amphenol / SSI Technologies
Amphenol / SV Microwave
Amphenol Advanced Sensor/Nova Sensor
Amphenol Advanced Sensor/Telaire
Amphenol Advanced Sensor/Thermometrics
Amphenol Advanced Sensors
Amphenol Aerospace
Amphenol Aerospace Operations
Amphenol Air LB
Amphenol Air LB France
amphenol air lb germany
AMPHENOL ALDEN
Amphenol Alden Products
Amphenol All Sensors
Amphenol All Sensors Corporation
Amphenol Anytek
AMPHENOL AUDIO
Amphenol Audio / Entertainment
Amphenol Backplane Systems
AMPHENOL CABLES ON DEMAND
AMPHENOL CANADA
AMPHENOL CANADA CORP.
Amphenol Casco
AMPHENOL COMMERCIAL
AMPHENOL COMMERCIAL PRODUCTS
Amphenol Communications Solutions
AMPHENOL CONNEX
Amphenol FCI
AMPHENOL FCI NANTONG
AMPHENOL FIBER OPTICS
Amphenol FSI
Amphenol GEC
Amphenol I/O
Amphenol i2s
Amphenol ICC
AMPHENOL ICC (COMMERCIAL PRODUCTS)
AMPHENOL ICC (FCI)
Amphenol ICC / Aorora
Amphenol ICC / FCI
Amphenol Industrial
Amphenol Industrial Operations
Amphenol IO
AMPHENOL LTW
Amphenol MCP
Amphenol Nexus Technologies
Amphenol Oil & Gas Technology
AMPHENOL PCD
Amphenol PCD Shenzhen
Amphenol Piher
AMPHENOL PIHER SENSORS AND CONTROLS
AMPHENOL RF
Amphenol SGX Sensortech
Amphenol SINE Systems
Amphenol Sine Systems Corp
AMPHENOL SINE SYSTEMS INC.
AMPHENOL SINE/TUCHEL
AMPHENOL SOCAPEX
AMPHENOL SOLAR
AMPHENOL SPECTRA
Amphenol Spectra-Strip
AMPHENOL SV MICROWAVE
amphenol taiwan
Amphenol TCS
Amphenol Technical Products
Amphenol Technology
Amphenol Times Microwave Systems
AMPHENOL TUCHEL
Amphenol Wilcoxon
Amphenol/Spectra-Strip
Amphenol-FCI
Amphenol-RF Division
Amphenol-Tuchel Electronics
BERG / FCI
FCI
FCI ELECTRONICS
INDUSTRIAL@AMPHENOL
InterCon Systems / Amphenol
LTW
PHR
PIHER
PIHER INTERNATIONAL
PIHER INTL
PIHER SENSOR CONTROLS
Piher-Amphenol
SGX SENSORTECH CHINA LIMITED
SV Microwave
SV Microwave Inc
THR
Time Microwave
Time Microwave Systems
Times Microwave
Times Microwave Systems

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted