Bussmann In-Line Fuseholder HR and HM For Type SFE and Various Length Fuses Series Dimensional Data: All dimensions (0.015) 2.19 2.19 (55.6mm) 0.75 (19.1mm) 0.69 (17.5mm) 0.38 1.56 (9.5mm) (39.7mm) General Information: Bayonet type knob. Maximum current rating 20 amps voltage rating 32 volts AC. Holders available as complete assembly consisting of in-line Catalog Symbols: HRJ, HRI, HRH, HRE, HRG, HRF, HMJ, holder with 8 or 14 of 14 insulated wire and installed HMI, HMH, HME, HMG, HMF fuses. In-Line Fuseholders Replacement springs BK/1A1853. Ampere Rating: 20 Amperes Replacement contacts 9838 for 18 - 22 wire. Voltage Rating: 32 Volts AC 9841 for 12 - 16 wire. Temperature Rating (RTI): 140C Agency Approvals: No agency listing. Catalog Symbol Amps Volts AC Includes Fuse Wire HRJ* SFE-20 HRI SFE-14 HRH SFE-9 19 of 14 HRE SFE-7 HRG SFE-6 HRF SFE-4 20 32 HMJ** SFE-20 HMI SFE-14 HMH SFE-9 8 of 14 HME SFE-7 HMG SFE-6 HMF SFE-4 *Also available as in-line fuseholder only with lead wire contacts, HRJ-Less-Fuse. **Also available as in-line fuseholder only with lead wire contacts, HMJ-Less-Fuse. HDJ-A For 1 fuse, no wire or fuse included, accepts 18 - 20 wire. HDJ-B For 1 fuse, no wire or fuse included, accepts 12 - 16 wire. HDI-A For fuse, no wire or fuse included, accepts 18 - 20 wire. HDI-B For fuse, no wire or fuse included, accepts 12 - 16 wire. HAF-A For fuse, no wire or fuse included, accepts 18 - 20 wire. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. HR and HM Series 12-21-98 Page 1 of 1 BIF Doc 2122 SB98107 Rev. A