PDM-AMI4-AAAAC Eaton

IP6k9k sealed fuse holder for AMI (SAE Type SF30) fuses PDM-AMI multi-fuse holder family With the fuses and their Features & Benefits The PDM-AMI family of spares enclosed in an IP6k9k fuse holders has been Sealed cavity for both active enclosure, input and output designed to allow up to four & spare fuses connections are made through ring terminals reducing bolt-in style AMI (SAE Type Protecting high-current harness costs while protecting SF30) fuses to be connected power distribution and critical circuits. curcuit protection from while providing protection high pressure spray from difficult environmental This holder is a sealed solution for your higher current conditions. Allowing remote and (30A-200A) requirements. It protected mounting of has multiple fuses with spares higher current bolt-in fuses Options contained in the same sealed location. Housing up to four fuses in Laser etch capable cover same package (both inside & out) Laser etch capability Reduces harness cost and eliminates environmental 2, 3 or 4 fuse models complexity while protecting damage to decals and labels, (supplied with or without and vibration resistant critical circuits. fuses installed) design allows for remote, Sealed solution for Single or dual input cable environmentally challenging higher current (30A-200A) terminals (on the four- mounting location. requirements position fuse holder) Holds spare fuses and Certifications & Standards protects them in a sealed package. The PDM-AMI family of fuse holders is designed to Laser etch marking SAE electrical specifications eliminates environmental as well as IP6k9k damage to decals and labels environmental sealing and helps identify critical requirements. circuits Vibration resistant allows fuses to be mounted with greater flexibility mounting locationsSpecifications Temperature Material -40C (-40F) to 105C (185F) Housing & Cover: UL 94 V Sealing glass reinforced PBT IP6K9K Termination Bus Bars: Tin plated copper Vibration Input: M8 stud and keps nut Studs: Zinc plated steel, SAE J1455 PEM Fuse Output: M8 stud and keps nut Sizing 2, 3, and 4 positions Torques available Mounting: 80 lbs. (9.0 Nm) Ratings Fuse Mounting: 40 lbs. (4.5 30A to 200A AMI (SAE Type Nm) SF30) fuses Input: 75 lbs. (8.5 Nm) Maximum combined current ratings at 135% overcurrent and 105 - PDM-AMI2: 200A - PDM-AMI3: 225A - PDM-AMI4: 425A Dimensions 2 - Eaton Corporation PDM-AMI family