463 463-002 EMI/RFI Environmental G-Spring Backshell with Strain Relief Direct Coupling - Low Profile 463 F S 002 M 16 05 F 6 CONNECTOR DESIGNATORS Product Series Length: S only (1/2 inch increments: * A-B -C-D-E-F Connector e.g. 6 = 3 inches) Designator Strain Relief Style (F, G) G-H-J-K-L-S Angle and Profile * Conn. Desig. B See Note 6 A = 90 Cable Entry (Table V) B = 45 DIRECT COUPLING S = Straight Shell Size (Table I) Basic Part No. Finish (Table II) 1.220 Length * (31.0) Length .060 (1.52) Max A Thread Min. Order Length 2.0 Inch (Table I) (See Note 5) Cable B M Range (Table IV) (Table I) STYLE 2 (STRAIGHT * Length .060 (1.52) Shown with Style F See Note 1) Minimum Order Length 1.5 Inch Strain Relief (See Note 5) J G J E (Table III) (Table V) (Table III) (Table V) F (Table V) B B (Table I) (Table I) H (Table V) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) Shown with Style G Shown with Style F Strain Relief Strain Relief N (Table IV) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 463 - Page 4463-002 EMI/RFI Environmental G-Spring Backshell with Strain Relief Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: FRONT ADAPTER TABLE IV: CABLE ENTRY J Max - Conn. Designator Cable Range Dash M N Shell A-E-F Max No. Max Max Min Size J-H-L-S D-B-G-K C .250 (6.4) 01 .843 (21.4) .625 (15.9) .125 (3.2) 08/09 1.180(30.0) 1.440(36.6) .375 (9.5) 02 .968 (24.6) .750 (19.1) .156 (4.0) 10/11 1.180(30.0) 1.440(36.6) .438 (11.1) 03 1.046 (26.6) .875 (22.2) .250 (6.4) 12/13 1.180(30.0) 1.440(36.6) 1.735(44.1) .500 (12.7) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) 14/15 1.180(30.0) 1.440(36.6) 1.915(48.6) .625 (15.9) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) 16/17 1.380(35.0) 1.560(39.6) 1.915(48.6) .750 (19.1) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) 18/19 1.380(35.0) 1.560(39.6) 1.915(48.6) .875 (22.2) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) 20/21 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.000 (25.4) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 22/23 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.125 (28.6) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 24/25 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.250 (31.8) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 28/29 1.610 (40.9) 1.560(39.6) 1.915(48.6) 1.375 (34.9) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 32/33 1.610(40.9) 1.750(44.5) 1.915(48.6) 1.500 (38.1) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 36 1.610(40.9) 1.750(44.5) 1.915(48.6) 1.625 (41.3) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 40 1.610(40.9) 2.190(55.6) 1.915(48.6) 1.750 (44.5) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) * Consult factory for availability TABLE V: ELBOW DIMENSIONS E F G H Elbow Size Max Max Max Max 01 .630 (16.0) 1.720 (43.7) .636 (16.2) 1.670 (42.4) 02 .630 (16.0) 1.720 (43.7) .710 (18.0) 1.790 (45.5) 03 .692 (17.6) 1.780 (45.2) .734 (18.6) 1.810 (46.0) .755 (19.2) 1.870 (47.5) .825 (21.0) 1.880 (47.8) 04 05 .848 (21.5) 1.980 (50.3) .988 (25.1) 1.970 (50.0) 06 1.036 (26.3) 2.170 (55.1) 1.087 (27.6) 2.140 (54.4) 07 1.036 (26.3) 2.170 (55.1) 1.087 (27.6) 2.140 (54.4) 08 1.130 (28.7) 2.320 (58.9) 1.325 (33.7) 2.250 (57.2) 1.130 (28.7) 2.320 (58.9) 1.325 (33.7) 2.250 (57.2) 09 10 1.255 (31.9) 2.370 (60.2) 1.337 (34.0) 2.420 (61.5) 11 1.317 (33.5) 2.470 (62.7) 1.827 (46.4) 2.670 (67.8) 12 1.317 (33.5) 2.470 (62.7) 1.827 (46.4) 2.670 (67.8) 13 1.348 (34.2) 2.560 (65.0) 2.027 (51.5) 2.670 (67.8) 1.348 (34.2) 2.560 (65.0) 2.027 (51.5) 2.670 (67.8) 14 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. Angular Function S only. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 463 - Page 5 463