550T009N1R3L1 Glenair

MIL-DTL-24308 D-Subminiature 550-009 EMI/RFI D-Subminiature Rear Panel Mounted Split Backshell Strain Relief - for overall Shielding 550 T 009 M 2 R5 L 1 Basic Part No. 0 = Without EMI Gasket 1 = With EMI Gasket Cable Entry Style T = Top L = Strain Relief, G = Gland Nut S = Side E = End Rear Mounting Connector Panel Thickness (Table III) Basic Part Number Shell Size (Tables I and II) Finish Symbol (Page 3) 1.940 (49.3) Max F Max Typ Cable Range E S 1.55 Style L SIDE (39.4) Strain ENTRY Max Relief T ToP ENTRY E 4-40 UNC-2B Female .810 Jackscrew Typ. (20.6) (2 Places) Max .035 (.9) Typ. H Typ. E RFI/EMI Gasket A END Optional G ENTRY C B Style G Gland Nut D 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-26550-009 EMI/RFI D-Subminiature Rear Panel Mounted Split Backshell Strain Relief - for overall Shielding TABLE I: CoNNECT oR/SHELL INTERFACE & BACKSHELL DIMENSIoNS Coml A B D Shell Shell Size Max Max C Ref005 (.1) Size Ref 1.393 (35.4) .624 (15.8) .312 (7.9) .984 (25.0) 1 E/09 1.706 (43.3) .624 (15.8) .312 (7.9) 1.312 (33.3) 2 A/15 2.265 (57.5) .624 (15.8) .312 (7.9) 1.852 (47.0) 3 B/25 2.900 (73.7) .624 (15.8) .312 (7.9) 2.500 (63.5) 4 C/37 2.800 (71.1) .750 (19.1) .375 (9.5) 2.406 (61.1) 5 D/50 2.900 (73.7) .844 (21.4) .422 (10.7) 2.500 (63.5) 6* F/104 * Shell Size 6 Available in Top Entry Only. TABLE II: BACKSHELL DIMENSIoNS & CABLE ENTRY Coml Shell F + .031 (0.79) Cable Range Shell Size H Size E Max G + .031 (0.79) Min Max Ref .843 (21.4) 1 1.32 (33.5) 1.046 (26.6) 1.46 (37.1) .125 (3.2) .250 (6.4) E/09 .843 (21.4) 2 1.32 (33.5) 1.046 (26.6) 1.46 (37.1) .250 (6.4) .375 (9.5) A/15 .969 (24.6) 3 1.54 (39.1) 1.156 (29.4) 1.71 (43.4) .312 (7.9) .475 (12.1) B/25 .969 (24.6) 4 1.54 (39.1) 1.156 (29.4) 1.71 (43.4) .312 (7.9) .475 (12.1) C/37 1.109 (28.2) 5 1.54 (39.1) 1.218 (30.9) 1.71 (43.4) .437 (11.1) .575 (14.6) D/50 1.468 (37.3) 6 1.87 (47.5) 1.594 (40.5) n/a .812 (20.6) 1.000 (25.4) F/104 TABLE III: MouNTING PANEL THICKNESS 1. Metric dimensions (mm) are indicated in parentheses. Dash Panel 2. Do NoT uSE CoNNECT oRS WITH FLoAT MouNTINGS. No. Thickness 3. Overall shield. Thickness range: Max to .062 (1.6). R1 .031 (.8) 4. This backshell is designed for rear mounted connectors. R2 .047 (1.2) Consult factory for additional panel thickness. R3 .062 (1.6) 5. See page A-5 for mounting diagram. R4 .093 (2.4) R5 .104 (2.6) R6 .125 (3.2) R7 .156 (4.0) R8 .135 (3.4) R9 .188 (4.8) 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-27 MIL-DTL-24308 D-Subminiature