Data Sheet Formable microwave cable SR 86 M17 Item: 22810173 Description Semi-rigid: Semi-rigid, formable microwave cables RG405 dimension, MIL style, 50 Ohm, 40 GHz, 125C, 2.2 mm, no jacket Technical Data Construction Material Detail Diameter Centre conductor Steel, Copper+Silver plated Wire 0.51 mm Dielectric PTFE (Polytetrafluoroethylene) 1.68 mm Outer conductor Copper Tube, 100% 2.2 mm Electrical Data Impedance 50 +/- 1.5 Operating Frequency 40 GHz Capacitance 105 pF/m Velocity of signal propagation 69.5 % Signal delay 4.8 ns/m Screening effectiveness 120 dB (up to 20 GHz) Operating voltage 1.5 kVrms (at sea level) Mechanical Data Weight 2.28 kg/100 m Min. bending radius static 3.18 mm Environmental Data Temperature range -55 C ... +125 C Installation temperature -20 C... +60 C Halogen free No 2011/65/EU (RoHS - including compliant 2015/863 and 2017/2102) 1907/2006/EC (REACH) compliant 2000/53/EC (ELV) compliant 2012/19/EU (WEEE) no special marking needed Additional Information Remarks (For details refer to the HUBER+SUHNER RF CABLES GENERAL CATALOGUE or contact your nearest HUBER+SUHNER partner) Suitable Connectors Cable group Y3 2 mm / 50 Ohm Document: DOC-0000177977 AS / PDO A / date of publication: 02.12.2020 20:04:27 / uncontrolled copy Page 1/2Data Sheet Formable microwave cable SR 86 M17 Item: 22810173 Matrix typical Attenuation formula: (a*f 0.5 + b*f) and maximum Power CW formula: (p/f 0.5) Coefficients: a = 0.58454 b = 0.03967 f = 40 P at 1GHz = 130 max Frequency Nom. attenuation Nom. attenuation Max. CW power (GHz) (dB / m) (dB / ft) (W) sea level 25 C sea level 25 C sea level 40 C ambient ambient ambient temperature temperature temperature 2.0 0.91 0.276 92 4.0 1.33 0.405 65 6.0 1.67 0.509 53 8.0 1.97 0.601 46 10.0 2.25 0.684 41 12.0 2.5 0.762 38 14.0 2.74 0.836 35 16.0 2.97 0.906 33 18.0 3.19 0.973 31 20.0 3.41 1.039 29 22.0 3.61 1.102 28 24.0 3.82 1.163 27 26.0 4.01 1.223 25 28.0 4.2 1.281 25 30.0 4.39 1.339 24 32.0 4.58 1.395 23 34.0 4.76 1.450 22 36.0 4.94 1.504 22 38.0 5.11 1.558 21 40.0 5.28 1.610 21 HUBER+SUHNER is certified according to ISO 9001, ISO 14001, AS/EN9100, ISO/TS 16949 and IRIS. www.hubersuhner.com Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000177977 AS / PDO A / date of publication: 02.12.2020 20:04:27 / uncontrolled copy Page 2/2