6SVPS220M

Conductive Polymer Aluminum Solid Capacitors Surface Mount Type SVPS series Features 105 5000 h RoHS compliance, Halogen free Specifications Size code A5 B6 C6 E7 F8 Category temp. range 55 to +105 Rated voltage range 4.0 V to 10 V 4.0 V to 16 V 4.0 V to 20 V 4.0 V to 25 V 4.0 V to 16 V Nominal cap.range 10 F to 33 F 22 F to 68 F 22 F to 150 F 10 F to 270 F 100 F to 680 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current Please see the attached characteristics list Dissipation factor (tan ) Please see the attached characteristics list +105 5000 h, rated voltage applied (25 V product : 20 V applied) Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit +60 , 90 % to 95 % RH, 1000 h, No-applied voltage Capacitance change Within 20 % of the initial value Damp heat (Steady state) Dissipation factor (tan) 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking Dimensions (not to scale) Polarity marking () 0.2 max. W Lot No. Series code* L R R. capacitance Unit (F) R. voltage Size +0.1 *1 D0.5 L W0.2 H0.2 C0.2 R (V) P -0.4 code A5 4.0 5.4 4.3 4.3 5.0 0.6 to 0.8 1.0 B6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 0.6 to 0.8 * Depends on the case size. F8 10.0 7.9 10.3 10.3 11.0 4.6 *1 : Reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03-Feb-17 D H P CSVPS series Characteristics list Case size Specifications Standard (Reel size : 380) (mm) Rated Rated capacitance Size Min. voltage Ripple *4 (20 %) code *2 LC Packaging ESR *3 (V) *1 D L tan Part number current (F) (m max.) Q ty (A (mA rms) (pcs) 33 4.0 5.4 A5 740 200 0.15 66 4SVPS33M 2000 68 5.0 5.9 B6 1970 30 0.12 300 4SVPS68M 1500 4.0 150 6.3 5.9 C6 2570 22 0.12 300 4SVPS150M 1000 270 8.0 6.9 E7 3220 22 0.12 500 4SVPS270M 1000 680 10.0 7.9 F8 4130 20 0.12 544 4SVPS680M 500 22 4.0 5.4 A5 740 200 0.12 69.3 6SVPS22M 2000 47 5.0 5.9 B6 1970 30 0.12 300 6SVPS47M 1500 6.3 120 6.3 5.9 C6 2570 22 0.12 300 6SVPS120M 1000 220 8.0 6.9 E7 3220 22 0.12 500 6SVPS220M 1000 470 10.0 7.9 F8 4130 20 0.12 592 6SVPS470M 500 10 4.0 5.4 700 220 0.10 50 10SVPS10M 2000 A5 15 4.0 5.4 740 200 0.10 75 10SVPS15M 2000 33 5.0 5.9 B6 1100 70 0.12 165 10SVPS33M 1500 10 68 6.3 5.9 C6 2200 30 0.12 300 10SVPS68M 1000 8.0 6.9 E7 2760 30 0.12 500 10SVPS150MX 1000 150 10.0 7.9 3020 30 0.12 300 10SVPS150M 500 F8 330 10.0 7.9 3770 24 0.12 660 10SVPS330M 500 22 5.0 5.9 B6 1060 90 0.10 176 16SVPS22M 1500 39 6.3 5.9 C6 2460 24 0.12 300 16SVPS39M 1000 16 82 8.0 6.9 E7 2760 30 0.12 262 16SVPS82M 1000 100 10.0 7.9 2670 35 0.12 320 16SVPS100M 500 F8 180 10.0 7.9 3430 29 0.12 576 16SVPS180M 500 22 6.3 5.9 C6 1450 60 0.10 88 20SVPS22M 1000 20 47 8.0 6.9 1890 45 0.12 188 20SVPS47M 1000 E7 25 10 8.0 6.9 1500 60 0.10 125 25SVPS10M 1000 *1: Ripple current (100 kHz / +105 ) : The surface temperature of aluminum case top must not exceed 105 . A rise in temperature due to self-heating by ripple current should be factored in. *2: ESR (100 kHz to 300 kHz / +20 ) *3: tan (120 Hz / +20 ) *4: After 2 minutes Please refer to each page in this catarog for Reflow conditions and Taping specifications. Frequency correction factor for ripple current Frequency(f) 120 Hz f < 1 kHz 1 kHz f < 10 kHz 10 kHz f < 100 kHz 100 kHz f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03-Feb-17