EETUQ2G471DA

Aluminum Electrolytic Capacitors/ UQ Snap-in Type Country of Origin Series: Japan UQ Type : TS Malaysia n Features Endurance: 85C 2000 h U.S.A (ii) 30% smaller than series UP RoHS directive compliant (ii) Regarding USA product, , n Recommended Applications Please check PEDCA s Smoothing circuits, AC adaptor Catalog. n Specifications Category temp. range -40 to + 85C -25 to + 85C Rated W.V. Range 16 to 100V.DC 160 to 250 V .DC 315 to 450 V .DC Nominal Cap. Range 1000 to 100000F 270 to 3900 F 82 to 1000 F Capacitance Tolerance 20 % (120Hz/+20C) (A) max. after 5 minutes application of rated working voltage at +20C. 3CV DC Leakage Current C:Capacitance(F) V: W.V. (V.DC) tan Please see the attached standard products list Frequency (Hz) 50 60 100 120 500 1k 10k to 16 to 100V Frequency Correction Correction 0.93 0.95 0.99 1.00 1.05 1.08 1.15 Factor for Ripple Current Factor 160 to 450V 0.75 0.80 0.95 1.00 1.20 1.25 1.40 After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage ) at +85C, the capacitor shall meet the following limits. Endurance Capacitance change 20 % of initial measured value tan < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +852 C with no voltage applied and then being stabilized Shelf Life at +20 C, capacitors shall meet the limits specified in Endurance(With voltage treatment) n Dimensions in mm (not to scale) (10.0) 2-2.00.1 10.00.1 Polarity bar PET Sleeve Vent L+2.0 max 4.0 0.5 Recommended PWB piercing plan Terminal +0.2 0.8-0.1 2.0 max (t=0.8) Bottom of can 1.5 0.2 Standard terminal type does not require terminal trimming process. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE164 D+1.0 max (3.5) 4.00.5Surface Mount Type Radial Lead Type Snap-in Type Aluminum Electrolytic Capacitors Aluminum Electrolytic Capacitors/ UQ n Standard Products Case size Specification Part No. Min .PackagingQ ty W.V. Cap. Ripple Dia. Length PET sleeve tan current (20%) Terminal Length (120Hz) (120Hz) 4.0mm (+85C) (+20C) (F) (pcs) (V) (mm) (mm) (Without P.V.C. plate) (A) 12000 22 25 4.5 0.50 EETUQ1C123HJ 200 15000 22 30 5.3 0.50 EETUQ1C153HJ 200 18000 22 35 5.6 0.50 EETUQ1C183HJ 200 25 25 5.6 0.50 EETUQ1C183JJ 200 22000 22 40 6.1 0.50 EETUQ1C223HJ 200 25 30 6.1 0.50 EETUQ1C223JJ 200 27000 22 45 6.3 0.50 EETUQ1C273HJ 200 25 35 6.3 0.50 EETUQ1C273JJ 200 30 25 6.3 0.50 EETUQ1C273KJ 200 16 33000 22 50 6.8 0.50 EETUQ1C333HJ 200 25 40 6.8 0.50 EETUQ1C333JJ 200 30 30 6.8 0.50 EETUQ1C333KJ 200 35 25 6.8 0.50 EETUQ1C333LJ 200 39000 25 45 6.9 0.56 EETUQ1C393JJ 200 30 35 6.9 0.56 EETUQ1C393KJ 100 47000 25 50 7.5 0.64 EETUQ1C473JJ 200 30 40 7.5 0.64 EETUQ1C473KJ 100 35 30 7.5 0.64 EETUQ1C473LJ 200 56000 30 45 8.7 0.73 EETUQ1C563KJ 100 35 35 8.7 0.73 EETUQ1C563LJ 100 68000 30 50 9.1 0.85 EETUQ1C683KJ 100 35 40 9.1 0.85 EETUQ1C683LJ 100 82000 35 45 9.5 0.99 EETUQ1C823LJ 100 100000 35 50 10.2 1.17 EETUQ1C104LJ 100 8200 22 25 3.6 0.40 EETUQ1E822HJ 200 10000 22 30 3.8 0.40 EETUQ1E103HJ 200 12000 22 30 4.1 0.40 EETUQ1E123HJ 200 25 25 4.1 0.40 EETUQ1E123JJ 200 15000 22 35 4.6 0.40 EETUQ1E153HJ 200 25 30 4.6 0.40 EETUQ1E153JJ 200 18000 22 40 5.5 0.40 EETUQ1E183HJ 200 25 25 35 5.5 0.40 EETUQ1E183JJ 200 30 25 5.5 0.40 EETUQ1E183KJ 200 22000 22 45 6.1 0.40 EETUQ1E223HJ 200 25 40 6.1 0.40 EETUQ1E223JJ 200 30 30 6.1 0.40 EETUQ1E223KJ 200 35 25 6.1 0.40 EETUQ1E223LJ 200 27000 25 45 6.2 0.40 EETUQ1E273JJ 200 30 35 6.2 0.40 EETUQ1E273KJ 100 33000 25 50 6.8 0.40 EETUQ1E333JJ 200 30 40 6.8 0.40 EETUQ1E333KJ 100 35 30 6.8 0.40 EETUQ1E333LJ 200 Endurance : 85C 2000 h, Terminal Pitch : 10mm When capacitors of f3545L and f3550L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE165