HD D-Sub connectors - Stamped and Formed Contacts RIGHT ANGLE HIGH DENSITY CONNECTORS Specifications Amphenols high density Connector interfaces according to: MIL C24308 UL File: E232356 D-Sub connectors complement Amphenols extensive D-Sub Materials and Platings connector line. This line offers many Shells Steel, tin over nickel plating superior features, high performance Insulator Glass-filled thermoplastic, UL 94V- 0 level and low installation cost. Contacts Brass, selected gold in mating area 2.54m (100) min.tin on The decreased contact spacing termination area over 1.27m accommodates greater signal (50 ) min.nickel density in comparison to conventional Rear insert Brass, 2.54m (100 ) min.nickel plated D-Sub connectors. Boardlock Brass, 2.54m (100 ) min.nickel plated Screwlock Brass, 2.54m (100 ) min.nickel plated Economical Electrical Data right angle PCB Current rating 3A Voltage rating 250V AC/ rms 50Hz connectors Withstanding voltage 1000V AC/rms 50Hz for one minute Insulation resistance 5000M at 500V DC Contact resistance 25m max Climatic Data Operating temperature -55C to +105C Salt spray 24 hours Industrial Mechanical Data Telecom Single contact insertion force 0.34kg (0.75lb) max. Any industry standard Single contact withdrawal force 0.02kg (0.044lb) min. I / O connections Mating and unmating force Unit: kg ( lb) N o. of Cts Mate (max) Unmate (min) 15 3.81 (8.42) 0.52 (1.14) 26 5.95 (13.16) 1.05 (2.32) 44 9.26 (20.46) 1.37 (3.02) 62 13.48 (29.78) 1.76 (3.88) Standard plating thickness Gold flash 0.38m (15 ) Gold 0.76 m (30 ) Gold MAIN CHARACTERISTICS APPLI CATI ONS DESCRI PTI ON HD / E19Shell size dimensions Pin Socket Nb OF DIMENSIONS mm ( inch ) CONTACTS A B C C D 15 30.84 (1.214) 24.99 (.984) 16.92 (.661) 16.26 (.640) 2.29 (.090) 26 39.24 (1.545) 33.32 (1.312) 25.25 (.994) 24.56 (.967) 2.29 (.090) 44 53.04 (2.088) 47.04 (1.852) 38.96 (1.534) 38.30 (1.508) 2.29 (.090) 62 69.34 (2.730) 63.50 (2.500) 55.42 (2.182) 54.76 (2.156) 2.41 (.095) OVERALL DIMENSIONS 6.0 .236 5.8 .228