PC16SH10IP06503A2020TA

16 mm Carbon Potentiometer PC-16 FEATURES Carbon resistive element Dust proof enclosure Polyester substrate Modular gang type (up to 4) Self extinguishable material UL 94-V0 Upon request: Metalic support Stereo matching Switch Nut & washer Bushless option available Bushless version MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Mechanical rotation angle: Range of values (*) 300 5 Electrical rotation angle: 280 20 Torque: 0.5 to 1.5 Ncm. Tolerance (*): 20% (0.7 to 2.1 in-oz) 30% Stop torque: > 40 Ncm. ( >56 in-oz) Max. Voltage: 250 VDC (lin) 125 VDC (no lin) Max. torque nut (binding out): < 80 Ncm. (112 in-oz) Nominal Power 50C (122F) (see power rating curve) Thrust and pull in the shaft: > 25 N 0.2 W (lin) 0.1 W (no lin) Lin Log Alog. Taper (*) (Log. & Alog. only Rn > 1K) Residual resistance: Equivalent Noise Resistance: Operating temperature**: 25C + 70C (13F + 158F) ** Up to 85C depending on application * Others upon request HOW TO ORDER STANDARD OPTIONAL EXTRAS PC-16 D H 10 I M06 203 A 2020 0 Serie Mounting style Terminals Value Tolerance Mounting brackets Switch H= Horizontal I = PCB PC-16 2020 = +/- 20% M1 I = PCB V = Vertical C = Solder Lugs M2 3030 = +/- 30% C = Solder lugs (See note 1) (See note 7) Shafts (See note 9) (See note 5) M04 Stereo matching (See note 4) Model M06 M07 3D = 3dB Nuts & Washers Taper Shafts spec. leng. S =Single Bushing diameter M11 4D = 4dB -TA = loose nut & washer 6D = 6dB D =Tandem M17 A = Linear XX.X 07 = M7 MTA=assembled nut & (See note 8) B = Log. 10 = M10 P01 washer T =Triple (See notes 6,9) C = Alog. -T- = loose nut = SC Bushless P22 C =Quad. (See note 10) MT- = assembled nut --- Others tapers on request (See note 2) (See note 9) (See note 3) NOTES: (1) Mounting style: Type is only available in model potentiometer and with printed circuit terminals. (2) Bushings: Type10 has two paralell flat surfaces for avoiding rotation. Bushless option only available for single model. (3) M07 shaft is only available with M10 bushing. --- = no shaft (4) Value: Code: 10 1 Number of zeros 2 first digits of the value. In models,,, with different values, they will be asked by drawings. (5) Tolerance (non standard), upon request. Example: +7% Code: 07 05 negative tolerance -5% positive tolerance (6) Shaft special length: Only for special length and plain shafts (not knurled). Example: Shaft 6.35 L= 24.5 M07 ..... 24.5 NOTE: Maximun length recommended: L = 45 special length shafts (7) Mounting brackets: Only applicable for model, mounting and without switch. (8) Stereo matching: not available for single models. Maximun will be: 3dB for model 4dB for model 6dB for model (9) Not available for Bushless version. (10) Switch option not available with antilog taper. NOTE: The information contained here should be used for reference purposes only. QS 9000 ISO 14001 Certificate N 72037 Certificate N 65663 73HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS Shaft length .................................. 0 Standard Length Mounting brackets ........................ Without mounting brackets (Max. 16 digits) PC-16 S V + DRAWING NUMBER Stereo matching ........................... Only on request (see note 8) This way of ordering should be used for options which are not included Switch ........................................... No switch in theHow to orde standard and optional extras. Nut & washer ................................ Without nut and washer MODELS -0.1 1.1 6.5 7.5 7.5 7.5 E S M10 x 0.75 A S M10 x 0.75 E A 9 8 9 +0.5 +0.5 +0.5 45 16 45 8 16 30.5 5 6.5 7.5 7.5 7.5 A = Initial 5 5 S = Wiper E = Final +0.1 1.3 Mounting surface S D T C +0.1 10 1.3 PC-16 S/D/T/C..H... PC-16 SV ......... METALLIC SUPPORT 6.5 2.5 7.5 6.5 10 20 20 -0.1 -0.1 1 1.1 M10 x 0.75 M10 x 0.75 9 9 +0.5 +0.5 45 8 16 45 8 16 6.5 10 6.5 2.5 7.5 Mounting surface Mounting surface +0.1 1.3 +0.1 PC-16 SH......M1 PC-16 SH....M2 1.3 BUSHINGS 8 8 M7 x 0.75 M10 x 0.75 0.6 0.6 8 9 16 16 16 17 07 10 EXAMPLES OF BUSHLESS VERSION 3 3 3 thickness = 0.5 16 7.5 16 16 7.5 7.5 www.piher.net 74 6 6 18 16 4 5 5 8 12.5 4 20 5 5 8 12.5 4 18 4 8.8 8.8 4 18 18 6 16 18 6 4.6 8.8 15 5 5 20 15 4.6 8 12.5 4 4 15 8 4 18 8.8 8.8 15 PIHE