20-Serie CP-A 08-Serie IP-A 31/10/14 08:56 Page125 CP series Capacitive switches Distinctive features and specifications UG1410A Activated by the touch of a finger Even with surgeon gloves 50 million cycles Auto-calibration function Bushing diameter 16, 19 or 22 mm Momentary or latching B2 ENVIRONMENTAL SPECIFICATIONS MATERIALS Sealing : IP68 and IP69K according to IEC 60529 Case : aluminium, anodized 2 Triggered by flowing water Multi-wire leads section 0,22 mm Impact resistance : IK10 length 300 mm Operating temperature : -20C to +65C Cable, length 300 mm, section ESD : complies with EN61000-4-2 (extended) 8KV (20 contacts) depending on switch model and 15KV (20 air discharges) Connector : HE14 6V compatible with AMP/TYCO281839-3 ELECTRICAL AND GENERAL SPECIFICATIONS ADJUSTABLE SENSITIVITY Max. current/voltage rating : 200mA 24VDC Supply voltage : 5VDC, 12VDC or 24VDC Connection to ground by means of the Life expectancy : 50 million cycles yellow wire increases sensitivity Power consumption non-illuminated : 7mA (momentary version only). Power consumption illuminated : 25mA Operating force : 0N This switch should not be used LED state for output image option : in safety applications. 1 LED : the LED is ON when the output is closed. 2 LEDs : first colour is ON when the output is open. Second colour is ON when the output is closed. Output type : NPN Wiring diagrams 1 LED 2 LEDs Non-illuminated Legend Output indicator Independent Output indicator Independent R W R W R W R W R red +V R W Black black GND W white output OFF-ON Y yellow sensitivity G green -LED 1 Black Blue G Black Blue blue -LED2 Black G Black Black R Y W R Y W R Y W R Y W R Y W Wire colours may vary. Always refer to the label on the switch. OFF-MOM Black Black Black Blue G Black G Black 3 Wiring for switch connector 6 Pin 1 : GND Pin 4 : LED 2 Pin 2 : output Pin 5 : sensitivity 2 5 Pin 3 : +V Pin 6 : LED 1 4 Chamfer 1 APEM www.apem.com B2-12520-Serie CP-A 08-Serie IP-A 31/10/14 08:56 Page126 CP series Capacitive switches Overview CP 000 SERIES Bushing diameters Terminals Types of illumination/ LED functions voltage B1 16 mm (.630) 1 Flying leads S Independent 0 Non-illuminated - 5VDC B2 19 mm (.748) 2 Cable C Output indicator 1 Non-illuminated - 12VDC B3 22 mm (.866) 3 Connector 2 Non-illuminated - 24VDC A Standard ring - 5VDC N Standard ring - 12VDC B2 LED colours K Standard ring - 24VDC Electrical functions C Thin ring - 5VDC Blank Non-illum. Colours / Materials 1 OFF - MOM D Thin ring - 12VDC 0B Blue * 2 OFF - ON E Thin ring - 24VDC 0G Green * 0 Natural anodized F Large ring - 5VDC 0S Red 1 Blue anodized G Large ring - 12VDC 0Y Amber 2 Black anodized H Large ring - 24VDC 3 Green anodized GS Green/red * 5 Gold anodized A, N, K for dia. 16 & 19 only * For 12VDC and 6 Red anodized C, D, E, F, G, H for dia 22 only 24VDC models only On request Duration of activation 15 minutes for latching models (standard duration is infinite) Different lengths, gauges or colours for flying lead terminals Different cable lengths Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Packaging unit : 20 pieces The company reserves the right to change specifications without notice. B2-126 www.apem.com APEM