13000 series Professional quick-break momentary pushbutton switches DISTINCTIVE FEATURES PC and panel mount models Bushing 6.35 (1/4) and 11.9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts (A-AD2) : 4 A 30 VDC - gold plated contacts (CD) : 100 mA 30 V Minimum load (AD2-CD contacts) : 10 mA 50 mV, 10 A 5 V min. Initial contact resistance : 10 m max. Insulation resistance : 1,000 M min. at 5 00VDC Dielectric strength : 1,000 Vrms 50 Hz min. between terminals 2,000 Vrms 50 Hz min. between poles and between terminals and frame Contact bounce : 2 ms max. Electrical life : Contacts Max. current/voltage rating Number of cycles A 4 A 30 VDC 50,000 4 A 30 VDC AD2 20,000 (gold plating : 100 mA 30 VDC max.) CD 100 mA 30 VDC 50,000 Low level or mechanical life 150,000 GENERAL SPECIFICATIONS Torque : 1.25 Nm (.922 Ft.lb) max. applied to nut Standard panel thickness : 2 mm (.078 ) max. Total travel : 2 mm (.078) Operating temperature : -40 C to +85 C (-40 F to +185 F) The company reserves the right to change specifications without notice. 1 SW-13000-1808 PANEL SWITCHES13000 series Professional quick-break momentary pushbutton switches MATERIALS TERMINALS Case : diallylphthalate (DAP) Actuator : brass, nickel plated Bushing : brass, nickel plated 1.00 (.039) 1.20 (.047) 2.50 Housing : brass, nickel plated (.098) Contacts : A : silver AD2 : silver, gold plated (2 micron gold) CD : brass, gold plated Terminal seal : epoxy ELECTRICAL FUNCTION APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. KEYWAY Note : AD2 contacts can be used for high level applications.In this case, the gold layer is considered only as a protection against oxidation during storage. RELIABILITY - RUN-IN TEST 1 2 3 Upon request, each individual switch can be submitted to a low level run-in test of 50 or 250 cycles to ensure suitability for special applications requiring a very high level of PANEL CUT-OUT reliability (military, space,etc.). FOR 6,35 (1/4) BUSHING 6.50 6.50 6.50 6.50 6.50 6.50 2.20 (.255 DIA) (.255 DIA) (.255 DIA) 2.20 (.255 DIA) (.086 DIA) (.255 DIA) (.255 DIA) (.086 DIA) AGENCY APPROVALS 5.20 2 A 125 VAC/250 VAC 5.20 2.70 2.70 (.204) 2.70 2.70 (.204) (.106) (.106) (.106) (.106) Standard K X640 Standard K X640 Standard With K sealing option CECC 96401-001 6.50 6.50 6.50 2.20 (.255 DIA) (.255 DIA) (.255 DIA) (.086 DIA) Designed to MIL specifications Availability : UL : all models with silver or gold plated silver contacts. 5.20 2.70 2.70 (.204) CECC : consult factory for details of approved models. (.106) (.106) Marking : to order switches marked UL or CECC, Standard K X640 complete appropriate box of ordering format. With X640 sealing option 2 PANEL SWITCHES 1.10 (.043) 1.70 (.066) 5.00 (.196) 9.50 (.374) 1.10 (.043) 1.10 (.043)