Q14 series 14 mm panel mount LED indicators DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations Custom engraving available ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating & Storage Temperature Range: Rear plastic body: -30 C to +65 C ( -22 F to +149 F) Rear epoxy body: -40 C to +85 C ( -40 F to +185 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 30100 (dependant on model) Life Expectancy: 100,000 hours Torque: 4 cNm (dependent on option) Maximum panel thickness 11 mm MATERIALS Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body MOUNTING The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 IND-Q14-1709R1 LED INDICATORSQ14 series 14 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Typical All (Min to Max) LED COMPONENT SPECIFICATIONS Types) Prominent and Flush Forward Voltage 02 (No Resistor) 1.8 to 3.3 VDC 20 mA max Recessed 6 VDC 5.4 to 6.6 VDC 20 mA HE Red 80 mcd 10 mcd 2.0 V Green 60 mcd 5 mcd 2.2 V 12 VDC 10.8 to 13.2 VDC 20 mA Yellow 50 mcd 4 mcd 2.1 V 24 VDC 21.6 to 26.4 VDC 20 mA Blue 540 mcd 100 mcd 3.3 V 28 VDC 25.2 to 30.8 VDC 20 mA White 1000 mcd 150 mcd 3.3 V 110 VAC 99 to 121 VAC 6 mA Orange 80 mcd 200 mcd 2.2 V 220 VAC 207 to 235 VAC 3 mA Bi-color (Typical) 15/15 mcd 14/10 mcd 2.0V/2.2 V (Red/Green) * Customer to supply resistor for desired operating current. Tri-color (Typical) 60/50/50mcd 15/10/30 mcd 2.0 V/2.2 V/2.1 V (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 17,000 mcd 2,000 mcd 2.2 V Green 11,000 mcd 680 mcd 3.3 V Yellow 4,000 mcd 350 mcd 2.0 V Blue 2,500mcd 250 mcd 3.3 V White 4,400 mcd 250 mcd 3.3 V Orange 2,800 mcd 300 mcd 2.2 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 2,800 mcd 800 mcd 2.1 V Green 2,200 mcd 250 mcd 3.2 V Yellow 1,300 mcd 250 mcd 2.0 V Orange 850 mcd 200 mcd 2.1 V The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2 LED INDICATORS