Features Applications Powerratingsfrom0.5-3watts Telecommunications Largeterminalsandoptimizedbodyshape Audioequipment forpowerdissipation Medicalequipment(low/mediumrisk)** Excellentsurgecapabilities Basestations LowTCR Industrialequipment Non-inductiveversionsavailable RoHScompliant* PWR2010/3014/4318/5322 - Surface Mount Wirewound Resistors General Information The PWR2010/3014/4318/5322 Series surface mount wirewound resistors boast a high power density and excellent pulse power characteristics. They can be used in a wide range of applications where surge voltages or inrush currents are present. Electrical Characteristics Parameter PWR2010 PWR3014 PWR4318 PWR5322 Power 0.5 W 1.0 W 2.0 W 3.0 W Resistance Range 0.005 - 1.2K 0.005 - 5K 0.005 - 12K 0.01 - 20K 1 % Based on E24+E96 Series 5 % Based on E24 Series Resistance Range (Non-inductive Versions) 0.1 - 200 0.1 - 1K 0.1 - 2.4K 0.1 - 4K Based on E24 Series Tolerance 0.5 % / 1 % / 5 % Temperature Coefficient <0.1 200 PPM/C 0.1 - 0.99 90 PPM/C 1.0 - 10 50 PPM/C >10 20 PPM/C Operating Temperature -55 to 155 C Maximum Voltage P*R Environmental Characteristics Test Description Specification -55 +0 C/-3 C to 150 C +3 C/-0 C, 5 cycles, Thermal Shock R (2.0 % +0.05 ) with minimum 15 minutes at each cycle Short Time Overload Five times rated power for 5 seconds R (0.5 % +0.05 ) Solderability Immersion in solder 260 C 5 C for 5 0.5 seconds 90 % of contact covered in solder Resistance to Solder Heat Immersion in solder 260 C 5 C for 5 0.5 seconds R (0.5 % +0.05 ) Dielectric Strength Test voltage >500 Vrms for greater than 1 minute Pass Insulation Resistance Test voltage greater than 500 Vrms for one minute >1000 G High Temperature Exposure Ambient temperature of 175 C +5 C/-0 C for 250 8 hours R (2.0 % +0.05 ) Low Temperature Exposure Ambient Temperature of -65C 2C for 24 hours 4 hours R (2.0 % +0.05 ) Rated continuous voltage for 1000 hours (1 hour on and 0.5 hours Load Life R (2.0 % +0.05 ) off) at a test temperature of 70C 2 C Environmental Characteristics (Contd) Moisture Sensitivity Level.....................1 ESD Classification (HBM).................N/A Physical Characteristics WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov Body Material....................... Epoxy resin * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns products have not been designed for and are not intended for use in lifesaving, life-critical or life- Lead Frame .... 100 % Sn Plated Copper sustainingapplicationsnoranyotherapplicationswherefailureormalfunctionoftheBournsproductmayresult Flammability ....... Conforms to UL 94V-0 inpersonalinjuryordeath.SeeLegalDisclaimerNotice www.bourns.com/docs/legal/disclaimer.pdf. Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANTPWR2010/3014/4318/5322 - Surface Mount Wirewound Resistors Surge Performance (IEC 61000-4-5 1.2 s / 50 s) Typical Part Marking MANUFACTURER S 7 RESISTANCE TRADEMARK CODE 10R0 (PWR4318 & 6 PWR5322 YYWW PWR5322) DATE CODE 5 4 PWR4318 3 PWR3014 2 1 PWR2010 0 0.1 1 10 100 1000 10000 100000 Resistance (Ohms) Product Dimensions Recommended Pad Layout F A L MM H DIMENSIONS: (INCHES) B 0.508 TOLERANCE: (0.02) W C D Model A F L C B D W H 5.08 1.28 6.48 3.25 2.54 1.663 1.98 2.16 PWR2010 (0.20) (0.05) (0.255) (0.128) (0.10) (0.065) (0.078) (0.085) 7.5 1.75 8.9 4.64 3.50 2.405 2.45 2.95 PWR3014 (0.29) (0.069) (0.35) (0.183) (0.138) (0.095) (0.096) (0.116) 11.0 2.00 12.5 4.65 4.50 3.590 3.20 3.70 PWR4318 (0.43) (0.079) (0.49) (0.189) (0.177) (0.141) (0.126) (0.146) 13.5 2.50 14.9 5.65 5.50 4.20 3.70 4.20 PWR5322 (0.53) (0.098) (0.587) (0.229) (0.217) (0.165) (0.146) (0.165) Packaging Specifications Tape Reel Pieces Bulk Pkg. Model Width Diameter per Reel Quantity 12.0 PWR2010 2500 200 (0.472) 16.0 PWR3014 1500 200 (0.629) 330 24.0 (13.0) PWR4318 1500 100 (0.945) 24.0 PWR5322 1500 100 (0.945) Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Peak Voltage (kV)