Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comS25FS128S/S25FS256S 1.8 V, Serial Peripheral Interface with Multi-I/O, MirrorBit Non-Volatile Flash Features Density Erase status evaluation 100,000 Program-Erase Cycles, minimum S25FS128S-128 Mbits (16 MB) 20 Year Data Retention, minimum S25FS256S-256 Mbits (32 MB) Security Features Serial Peripheral Interface (SPI) One-Time Program (OTP) array of 1024 bytes SPI Clock polarity and phase modes 0 and 3 Block Protection: Double Data Rate (DDR) option Status Register bits to control protection against program Extended Addressing: 24- or 32-bit address options or erase of a contiguous range of sectors Serial Command subset and footprint compatible with S25- FL-A, S25FL-K, S25FL-P, and S25FL-S SPI families Hardware and software control options Multi I/O Command subset and footprint compatible with Advanced Sector Protection (ASP) S25FL-P, and S25FL-S SPI families Individual sector protection controlled by boot code or password Read Option for password control of read access Commands: Normal, Fast, Dual I/O, Quad I/O, DDR Quad I/O Technology Modes: Burst Wrap, Continuous (XIP), QPI Cypress 65 nm MirrorBit Technology with Eclipse Serial Flash Discoverable Parameters (SFDP) and Common Architecture Flash Interface (CFI), for configuration information Supply Voltage Program 1.7V to 2.0V 256- or 512-byte Page Programming buffer Program suspend and resume Temperature Range / Grade Automatic ECC internal hardware Error Correction Code Industrial (-40C to +85C) generation with single-bit error correction Industrial Plus (40C to +105C) Automotive AEC-Q100 Grade 3 (40C to +85C) Erase Automotive AEC-Q100 Grade 2 (40C to +105C) Hybrid sector options Automotive AEC-Q100 Grade 1 (40C to +125C) Physical set of eight 4-KB sectors and one 32-KB sector at the top or bottom of address space with all remaining Packages (All Pb-Free) sectors of 64 KB or 8-lead SOIC 208 mil (SOC008) FS128S only Physical set of eight 4-KB sectors and one 224-KB sector WSON 6 5 mm (WND008) FS128S only at the top or bottom of address space with all remaining WSON 6 8 mm (WNH008) sectors of 256 KB 16-lead SOIC 300 mil (SO3016 FS256S only) Uniform sector options BGA-24 6 8 mm Uniform 64-KB or 256-KB blocks for software compatibility 5 5 ball (FAB024) footprint with higher density and future devices 4 6 ball (FAC024) footprint Erase suspend and resume Known Good Die, and Known Tested Die Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-00368 Rev. *M Revised November 22, 2019