L-130WDT/1GYW Kingbright

T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: L-130WDT/1GYW Green Yellow Features Description z Pre-trimmed leads for pc board mounting. The Green source color devices are made with Gallium z 3 leads with common lead. Phosphide Green Light Emitting Diode. z Black case enhances contrast ratio. The Yellow source color devices are made with Gallium z Housing UL rating:94V-0. Arsenide Phosphide on Gallium Phosphide Yellow Light z Housing material: type 66 nylon. Emitting Diode. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB1508 REV NO: V.10B DATE: SEP/21/2012 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1102000199 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 Green (GaP) 18 40 L-130WDT/1GYW White Diffused 60 Yellow (GaAsP/GaP) 10 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions Green 565 peak Peak Wavelength nm IF=20mA Yellow 590 Green 568 D 1 Dominant Wavelength nm IF=20mA Yellow 588 Green 30 1/2 Spectral Line Half-width nm IF=20mA Yellow 35 Green 15 C Capacitance pF VF=0V f=1MHz Yellow 20 Green 2.2 2.5 VF 2 Forward Voltage F=20mA V I Yellow 2.1 2.5 Green 10 IR Reverse Current uA VR = 5V Yellow 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Yellow Units Power dissipation 62.5 75 mW DC Forward Current 25 30 mA Peak Forward Current 1 140 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAB1508 REV NO: V.10B DATE: SEP/21/2012 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1102000199