WP7113SRSGW T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Low power consumption Popular T-1 3/4 diameter package General purpose leads Reliable and rugged Long life - solid state reliability Available on tape and reel RoHS compliant APPLICATIONS Notes: Status indicator 1. All dimensions are in millimeters (inches). Illuminator 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. Signage applications 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. Decorative and entertainment lighting Commercial and residential architectural lighting ATTENTION Observe precautions for handling electrostatic discharge sensitive devices SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 120 300 Super Bright Red (GaAlAs) *40 *100 WP7113SRSGW White Diffused 35 20 60 Super Bright Green (GaP) *20 *60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAF2438 / 1101005292 Rev No: V.8A Date: 09/13/2021 WP7113SRSGW ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Super Bright Red 655 Wavelength at Peak Emission I = 20mA - nm F peak Super Bright Green 565 Super Bright Red 640 1 Dominant Wavelength I = 20mA - nm F dom Super Bright Green 568 Spectral Bandwidth at 50% REL MAX Super Bright Red 20 - nm I = 20mA Super Bright Green 30 F Super Bright Red 45 Capacitance C - pF Super Bright Green 15 2 Super Bright Red 1.85 2.5 Forward Voltage I = 20mA V V F F Super Bright Green 2.2 2.5 Temperature Coefficient of Super Bright Red 0.14 peak TC - nm/C peak I = 20mA, -10C T 85C Super Bright Green 0.1 F Temperature Coefficient of Super Bright Red 0.05 dom TC - nm/C dom I = 20mA, -10C T 85C Super Bright Green 0.06 F Temperature Coefficient of V Super Bright Red -1.9 F TC - mV/C V I = 20mA, -10C T 85C Super Bright Green -2 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d: 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Super Bright Red Super Bright Green Power Dissipation P 75 62.5 mW D Junction Temperature T 115 110 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 25 mA F 1 Peak Forward Current I 155 140 mA FM Electrostatic Discharge Threshold (HBM) 3000 8000 V - 2 Thermal Resistance (Junction / Ambient) R 610 570 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 470 390 C/W th JS 3 Lead Solder Temperature 260C For 3 Seconds 4 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm per pad). 3. 2mm below package base. 4. 5mm below package base. 5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAF2438 / 1101005292 Rev No: V.8A Date: 09/13/2021