NJM4580 DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION PACKAGE OUTLINE The NJM4580 is a dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. NJM4580R Featuring noiseless, higher gain bandwidth, high output current and (MSOP8(VSP8 )) low distortion ratio, and it is most suitable not only for acoustic electronic parts of audio pre-amp and active filter, but also for the industrial measurement tools. It is also suitable for the head phone amp at higher output current, and further more, it can be applied for NJM4580M NJM4580E NJM4580V the handy type set operational amplifier of general purpose in ( DMP8 ) ( SOP8 ) ( SSOP8 ) application of low voltage single supply type which is properly biased of the low voltage source. The D-Rank type products(NJM4580DD/LD/MD/ED) have specified maximum limits for equivalent input noise voltage. NJM4580D NJM4580L FEATURES ( DIP8 ) ( SIP8 ) Operating Voltage 2V~18V Low Input Noise Voltage 0.8Vrms typ. (RIAA) Wide GBW 15MHz typ. Low Distortion 0.0005% typ. Slew Rate 5V/s typ. Bipolar Technology Package Outline DIP8, SIP8, DMP8, SSOP8, MSOP8(VSP8) MEET JEDEC MO-187-DA SOP8 JEDEC 150mil PIN CONFIGURATION ( Top View ) PIN FUNCTION 1. A OUTPUT 1 8 A B 2. A - INPUT A 3. A +INPUT 2 7 - 4. V B 3 6 5. B +INPUT 6. B - INPUT 4 5 1 2 34 56 7 8 7. B OUTPUT + 8. V NJM4580L NJM4580D, NJM4580M, NJM4580E NJM4580V, NJM4580R EQUIVALENT CIRCUIT ( 1/2 Shown ) + V -INPUT OUTPUT +INPUT - V Ver.2012-09-14 - 1 - NJM4580 ABSOLUTE MAXIMUM RATINGS (Ta=25C, unless otherwise noted.) PARAMETER SYMBOL RATING UNIT + - Supply Voltage V /V 18 V Input Voltage V 15 (Note1) V ICM Differential Input Voltage V 30 (Note1) V ID DIP8, SIP8 : 800 DMP8, SOP8 : 300 Power Dissipation P mW D SSOP8 : 250 MSOP8(VSP8) : 400 (Note2) Operating Temperature Range Topr -40~+85 C Storage Temperature Range Tstg -40~+125 C (Note1) For supply voltage less than 15V, the absolute maximum input voltage is equal to supply voltage. (Note2) On the PCBEIA/JEDEC (114.376.21.57mm, 2 layers, FR-4 RECOMMENDED OPERATING CONDITIONS (Ta=25C) PARAMETER SYMBOL CONDITION MIN. TYP. MAX.UNIT + - Supply Voltage V /V 2 - 18 V + - ELECTRICAL CHARACTERISTICS (V /V =15V, Ta=25C, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX.UNIT Input Offset Voltage V R 10k - 0.3 3 mV IO S Input Offset Current I - 5 200 nA IO Input Bias Current I - 100 500 nA B Voltage Gain A R 2k,V=10V 90 110 - dB V L O Maximum Output Voltage V R 2k 12 13.5 - V OM L Common Mode Input Voltage Range V 12 13.5 - V ICM Common Mode Rejection Ratio CMR R 10k 80 110 - dB S Supply Voltage Rejection Ratio SVR R 10k 80 110 - dB S Supply Current I - 6 9 mA CC Slew Rate SR R 2k - 5 - V/s L Gain Bandwidth Product GB f=10kHz - 15 - MHz Total Harmonic Distortion THD A =20dB,V =5V,R =2k,f=1kHz - 0.0005 - % V O L Equivalent Input Noise Voltage V RIAA,R =2.2k,30kHz LPF - 0.8 - Vrms NI S + - ELECTRICAL CHARACTERISTICS (D-rank type(Note3), V /V =15V, Ta=25C, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX.UNIT Equivalent Input Noise Voltage V RIAA,R =2.2k - - 1.4 Vrms NI S (Note3)D-rank type is a Equivalent Input Noise Voltage selected product. It s only DIP, DMP, SOP and SIP package. Ver.2012-09-14 - 2 -