G3VM-401EY(TR)

MOS FET Relays G3VM-401BY/EY Analog-switching MOS FET Relay with Dielectric Strength of 5 kVAC between I/O Using Optical Isolation. Switches minute analog signals. Leakage current of 1 A max. when output relay is open. RoHS Compliant. Application Examples Electronic automatic exchange systems Measurement devices FA systems Note: The actual product is marked differently from the image shown here. List of Models Contact form Terminals Load voltage (peak value) Model Number per stick Number per tape SPST-NO PCB terminals 400 VAC G3VM-401BY 50 --- Surface-mounting G3VM-401EY terminals G3VM-401EY(TR) --- 1,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-401BY G3VM-401EY 0.25 7.12 0.25 7.12 0.25 6.4 0.25 6.4 0.25 0.25 7.62 7.62 0.80.25 +0.15 +0.15 +0.25 3.65 4.0 3.65 0.25 0.25 0.2 +0.1 1.0 0.25 0.05 min. Note: The actual product Note: The actual product 0.15 1.2 1.0 min. 0.15 is marked different- 1.2 is marked different- 2.5 min. 0.25 10.0 max. 2.54 ly from the image 0.1 7.85 to 8.80 ly from the image 0.5 shown here. shown here. Weight: 0.38 g 0.25 2.54 Weight: 0.38 g Terminal Arrangement/Internal Connections (Top View) G3VM-401BY G3VM-401EY 6 54 6 54 132 132 PCB Dimensions (Bottom View) Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-401BY Six 0.8-dia. holes 2.54 G3VM-401EY (0.61) 2.54 2.54 2.54 8.3 to 8.8 (0.61) 1.3 (1.52) (1.52) 1.5 MOS FET Relays G3VM-401BY/EY 73 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement conditions Input LED forward current I 50 mA Note: 1. The dielectric strength between the input and F output was checked by applying voltage be- Repetitive peak LED I 1 A 100 s pulses, 100 pps FP tween all pins as a group on the LED side and forward current all pins as a group on the light-receiving side. LED forward current I /C 0.5 mA/CTa 25C Connection Diagram F reduction rate LED reverse voltage V 5V 1 6 Load R AC Connection 2 5 or Connection temperature T 125 C DC j A 3 4 Output Load voltage (AC peak/DC) V 400 V OFF Continuous Connection A I 120 mA O load current 1 6 Load Connection B 120 Connection 2 5 DC Connection C 240 B 3 4 ON current Connection A I /C 1.2 mA/CTa 25C ON reduction rate Connection B 1.2 1 6 Load Connection C 2.4 Connection 2 5 DC Connection temperature T 125 C j C 3 4 Dielectric strength between input and V 5,000 V AC for 1 min I-O rms output (See note 1.) Operating temperature T 40 to +85 C With no icing or condensation Storage temperature T 55 to +125 C With no icing or condensation stg Soldering temperature (10 s) --- 260 C 10 s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA Note: 2. Turn-ON and Turn-OFF F F Times Reverse current I --- --- 10 AV = 5 V R R IF 1 6 RL VDD Capacity between terminals C --- 30 --- pF V = 0, f = 1 MHz T VOUT 2 4 Trigger LED forward current I --- --- 3 mA I = 120 mA FT O Output Maximum resistance Connection A R --- 17 35 I = 5 mA, ON F with output ON I = 120 mA O IF Connection B --- 11 20 I = 5 mA, F I = 120 mA O 90% Connection C --- 6 10 I = 5 mA, VOUT F 10% I = 240 mA O t ON t OFF Current leakage when the relay is open I --- 0.0004 1.0 AV = 400 V LEAK OFF Capacity between terminals C --- 40 --- pF V = 0, f = 1MHz OFF A Connection Capacity between I/O terminals C ---0.8 ---pF f = 1 MHz, V = 0 V I-O s Insulation resistance R 1,000 --- --- M V = 500 VDC, I-O I-O R 60% oH Turn-ON time t --- 0.3 1.0 ms I = 5 mA, R = 200 , ON F L V = 20 V (See note 2.) DD Turn-OFF time t --- 0.1 1.0 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 320 V Operating LED forward current I 57.5 25 mA Continuous load current (AC peak/DC) I --- --- 120 mA Operating temperature T 20 --- 65 C 74 MOS FET Relays G3VM-401BY/EY