KAF-1603 1536 (H) x 1024 (V) Full Frame CCD Image Sensor Description The KAF1603 Image Sensor is a high performance monochrome area CCD (charge-coupled device) image sensor with 1536 (H) www.onsemi.com 1024(V) photoactive pixels designed for a wide range of image sensing applications. The sensor incorporates true two-phase CCD technology, simplifying the support circuits required to drive the sensor as well as reducing dark current without compromising charge capacity. The sensor also utilizes the TRUESENSE Transparent Gate Electrode to improve sensitivity compared to the use of a standard front side illuminated polysilicon electrode. Optional microlenses focus the majority of the light through the transparent gate, increasing the optical response further. Table 1. GENERAL SPECIFICATIONS Figure 1. KAF1603 CCD Image Sensor Parameter Typical Value Architecture Full Frame CCD Features Total Number of Pixels 1552 (H) 1032 (V) True Two Phase Full Frame Architecture Number of Active Pixels 1536 (H) 1024 (V) = approx. 1.6 Mp TRUESENSE Transparent Gate Electrode Pixel Size 9.0 m (H) 9.0 m (V) for High Sensitivity Active Image Size 13.8 mm (H) 9.2 mm (V) 16.6 mm (Diagonal) Applications 1 Optical Format Die Size 15.5 mm (H) 10.0 mm (V) Scientific Imaging Aspect Ratio 3:2 ORDERING INFORMATION Saturation Signal 100,000 electrons See detailed ordering and shipping information on page 2 of Output Sensitivity 10 V/e this data sheet. Quantum Efficiency Peak: 77% (with Microlens) 400 nm: 45% Quantum Efficiency Peak: 65% (no Microlens) 400 nm: 30% Read Noise 15 electrons 2 Dark Current < 10 pA/cm Dark Current Doubling Tempera- 6.3C ture Dynamic Range 74 dB Charge Transfer Efficiency > 0.99999 Blooming Suppression None Maximum Date Rate 10 MHz Package CERDIP Package (Sidebrazed) Cover Glass Clear or AR Coated, 2 Sides NOTE: Parameters above are specified at T = 25C unless otherwise noted. Semiconductor Components Industries, LLC, 2014 1 Publication Order Number: February, 2017 Rev. 2 KAF1603/DKAF1603 ORDERING INFORMATION Table 2. ORDERING INFORMATION KAF1603 IMAGE SENSOR Part Number Description Marking Code KAF1603ABACDB2 Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed), Clear Cover Glass with AR Coating (Both Sides), Grade 2 KAF1603ABACDAE Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KAF1603ABA Serial Number KAF1603ABACPB2 Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass (No Coatings), Grade 2 KAF1603ABACPAE Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass (No Coatings), Engineering Sample KAF1603AAACPB2 Monochrome, No Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass (No Coatings), Grade 2 KAF1603AAA Serial Number KAF1603AAACPAE Monochrome, No Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass (No Coatings), Engineering Sample Table 3. ORDERING INFORMATION EVALUATION SUPPORT Part Number Description KAF1603125AEVK Evaluation Board (Complete Kit) See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at www.onsemi.com. www.onsemi.com 2