KAF-16801
4096 (H) x 4096 (V) Full
Frame CCD Image Sensor
Description
The KAF16801 is a high performance area CCD (charge-coupled
www.onsemi.com
device) image sensor with 4096 (H) 4096 (V) photo active pixels
designed for a wide range of image sensing applications.
The sensor incorporates true two-phase CCD technology,
simplifying the support circuits required to drive the sensor as well as
reducing dark current without compromising charge capacity.
The sensor also utilizes the TRUESENSE Transparent Gate Electrode
to improve sensitivity compared to the use of a standard front side
illuminated polysilicon electrode.
Table 1. GENERAL SPECIFICATIONS
Parameter Typical Value
Architecture Full Frame CCD
Pixel Count 4096 (H) 4096 (V)
Figure 1. KAF16801 Full Frame
CCD Image Sensor
Pixel Size 9.0 m (H) 9.0 m (V)
Active Image Size 36.88 mm (H) 36.88 mm (V)
52.1 mm (Diagonal)
Features
645 1.3x Optical Format
True Two Phase Full Frame Architecture
Chip Size 38.60 mm (H) 37.76 mm (V)
TRUESENSE Transparent Gate Electrode
Optical Fill Factor 100%
for High Sensitivity
Saturation Signal 100,000 electrons
Low Dark Current
Output Sensitivity 13 V/e
High Output Sensitivity
2
Dark Current (Accumulation Model) < 10 pA/cm
Application
Dark Current Doubling Rate 6C
Scientific Imaging
Dynamic Range 76 dB
(Saturation Signal/Dark Noise)
Quantum Efficiency 40%, 52%, 65%
ORDERING INFORMATION
(450, 550, 650 nm)
See detailed ordering and shipping information on page 2 of
Maximum Date Rate 10 MHz this data sheet.
Package CERDIP Package (Sidebrazed)
Cover Glass Clear
NOTE: Parameters above are specified at T = 25C unless otherwise noted.
Semiconductor Components Industries, LLC, 2015
1 Publication Order Number:
October, 2017 Rev. 4 KAF16801/DKAF16801
ORDERING INFORMATION
Table 2. ORDERING INFORMATION KAF16801 IMAGE SENSOR
Part Number Description Marking Code
KAF16801AAADPB1 Monochrome, No Microlens, CERDIP Package (Sidebrazed, CuW),
Taped Clear Cover Glass (No Coatings), Grade 1
KAF16801AAADPB2 Monochrome, No Microlens, CERDIP Package (Sidebrazed, CuW), KAF16801AAA
Taped Clear Cover Glass (No Coatings), Grade 2 Serial Number
KAF16801AAADPAE Monochrome, No Microlens, CERDIP Package (Sidebrazed, CuW),
Taped Clear Cover Glass (No Coatings), Engineering Sample
Table 3. ORDERING INFORMATION EVALUATION SUPPORT
Part Number Description
KEK4H0082KAF160801125 Evaluation Board (Complete Kit)
See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention
used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at
www.onsemi.com.
www.onsemi.com
2