Industrial Industrial Industrial Industrial Wireless Network Industrial Cellular Industrial Ethernet Switch Accessories Media Converter Device Server Access Point Management Software VPN Router M2M Gateway Industrial Ethernet Switch DIN-Rail Unmanaged Gigabit Ethernet Switch v1.2 / Oct, 2017 IGS-1080A IGS-1080A Industrial 8-port slim type unmanaged Gigabit Ethernet switch with 8x10/100/1000Base-T(X) Features Supports auto-negotiation and auto-MDI/MDI-X Supports Jumbo Frame up to 9K Bytes Relay output for carrying capacity of 1A at 24 VDC Supports store-and-forward transmission Supports flow control Hardware DIP switch for enabling/disabling the warning function Rigid IP-30 housing design DIN-Rail and wall mounting enabled Introduction IGS-1080A is the slim type unmanaged gigabit Ethernet switch with 8 x 10/100/1000Base-T(X) ports. IGS-1080A supports redundant power input, rigid IP-30 housing, plus DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40C to 70C can satisfy most of operating environments. Practical Operation IGS-1080A can be used in connecting several Ethernet devices such as Ethernet I/O, IP-Camera or other Ethernet switches. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. MOD TV MOD TV MOD TV System IGS-1080A MOD TV Connections of Ethernet devices 1-1811-181 Get Connected Anytime, Anywhere Industrial Ethernet Switch Industrial Ethernet Switch DIN-Rail Unmanaged Gigabit Ethernet Switch v1.2 / Oct, 2017 Dimensions 1 (Unit=mm) Specifications ORing Switch Model IGS-1080A Physical Ports 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 8 Technology IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX Ethernet Standards IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control MAC Table 4096 MAC addresses Processing Store-and-Forward LED Indicators Power Indicator Green : Power LED x 2 Fault Indicator Amber : Indicates PWR1 or PWR2 failure Green for port Link / Act 10/100/1000Base-T(X) RJ45 Port Indicator Amber for 100Mbps indicator DIP Switch DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable Fault contact Relay Relay output to carry capacity of 1A at 24VDC Power Redundant Input Power Dual DC inputs. 12~48 VDC on 6-pin terminal block. Power Consumption (Typ.) 5.5 Watts Overload Current Protection Present Reverse Polarity Protection Present 1-182 w w w.OR ingnet.com