20D MM METAL GEARMOTOR BRACKET PAIR Pololu

product The 20D MM Metal Gearmotor Bracket Pair is a motors and motor brackets product offered by Pololu. This pair of brackets provides mounting, spacing, and strain-relief for small 20D motors, such as the Pololu 20D mm Metal Gearmotor. The brackets are injection-molded plastic and have cutouts at their centers to fit the tiny motors and are designed to provide 6 mm of the space between the front and back. They feature four dowel pin holes (two on the top bracket and two on the bottom bracket) so that you can use them as mounting points to secure gears and other components. The rear of the bottom bracket has a strain-relief tab so you can use it to secure a wire. Every bracket pair comes with two stainless steel screws and two nuts for mounting the motor to the brackets. However, once the two brackets have been secured to the motor, they should remain attached to each other and provide a secure fit without additional hardware. The 20D MM Metal Gearmotor Bracket Pair can bend and twist when pressure is applied, which allows it to absorb shocks and reduce the risk of damage. It is a great choice for stability and durability when working with small robots and other dynamic projects.