0886.0471

Accessories Bowdencables incl. accessory www.schurter.com /PGZ01 Bowden Cable for Power Entry Modules Type A (Snap-in mounting) Type B (Screw-on mounting) Phase-out Phase-Out Last Order date: 30.06.2017 Last order date: 31.03.2015 Last delivery date: 30.09.2017 Description Characteristics - Component : - Designed for universal industrial applications Snap-in mounting from front side References - Approved together with power entry module Fits to type: CD-Bowdencable CG-Bowdencable KD-Bowdenca- ble KG-Bowdencable Weblinks pdf datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Distributor- Stock-Check, Accessories, Detailed request for product Remote Actuator Technology The remote actuator cable assembly consists of a wire cable inside of a plastic insulated spiral wire casing. Identifying a proper outing of the cable assembly is important. Deviations from line to line placement will require bends in the cable with resulting losses in the overall assembly. These inef- ficiencies show up as friction losses and lost motion. Frictional losses are increases in actuation force due to losses in the assembly. Lost motion is an undesirable difference between the input end of the assembly and the output end. The principle element of lost motion is backlash and deflection. Backlash is caused by the wire cable moving inside the casing with the change in direction of motion. It is the function of clearance between the wire cable and casing, plus the number of degrees of bend in the cable assembly. Deflection of the cable assembly, while usually low, can be minimized by anchoring the casing. This is especially true in those applications of cable assemblies with long lengths and/or large degrees of bend in the system. All of these losses and resulting inefficiencies can be reduced by the equipment designer through minimizing the total degress of bend in the assem- bly. Because of the number of variables effecting proper operation of any remotely actuated switch assembly, it is important that the ordering instruc- tions be used to determine proper cable length and to provide samples for customer approval. Consult figure for minimum information required to describe cable assembly application. How to specify length of a Bowden cable: R Mounting parallel to direction of actuation S Mounting 90 to direction of actuation B1 Actuating part B1 Actuating part B2 Power entry module B2 Power entry module R a / b / c / S a/ b/ c/ Ordering example: The following 3 positions are necessary to place an order: 1. Order No. socket KD14.4199.151 2. Order No. fuse drawer 4303.2024.03 3. Bowden cable (type of mounting /dimensions in mm) *R a/200 b/180 c/40 * The Order No. for a customer specific Bowden cable youll get with the acknowledgment. Delivery time for a customer specific Bowden cable sam- ple approx. 2 weeks. Standard Bowden cable sample, Order No. 0886.0101, ex stock Dimension mm A A B B 0 -0.10 4.6 0 -0.1 4.6 6.5 24.1 8.5 23.5 Type A (Snap-in mounting) Type B (Screw-on mounting) Dimension A will be evaluated and defined in trials by SCHURTER based on custo- Dimension A will be evaluated and defined in trials by SCHURTER based on custo- mer information a, b and c. (See Type R and Type S diagram below.) mer information a, b and c. (See Type R and Type S diagram below.) Connectors 1 PHASE-OUT 20 13.8 24 18 17a a Accessories Bowdencables incl. accessory www.schurter.com /PGZ01 0.1 18 > 17.5 min. R 0.5 > = R = 0.2 Panel cut-out for snap-in version Panel cut-out for screw version Assembly Instructions Drop bowden barrel into seat of switch Slide clamp around cable Type R Bowden cable locked into assembly Type R R Mounting parallel to direction of actuation B1 Actuation part B2 Power entry module Dimensions in mm (center of mounting B1 , outer surface to center of mounting B2 outer surface) Type S Type S S Mounting 90 to direction of actuation B1 Actuating part B2 Power entry module Dimensions in mm (center of mounting B1 , outer surface to center of mounting B2 , outer surface) Packaging unit 50 Pcs The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 2 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. b b PHASE-OUT 0.1 12.3 8.7 min. 03.09.2017 c c