Solid State Relay Timer DataSheet SeriesOneDR Timer 6 Amp AC and DC rated output Compact size (11mm wide) Dual SCR or MOSFET output AC/DC control Zero-crossing (resistive loads) or random-fire (inductive loads) AC output Timer status LED indicator UL listed, HP rated 8 Industry standard fuctions (A/At, B, C, D/Di, H/Ht, L/Li, Ac and Bw) PRODUCT SELECTION Control Voltage AC Output DC Output 12-24 VAC/DC DRTx24D06x DRTx06D06 90-140 VAC/DC DRTx24B06x 180-280 VAC/DC DRTx24A06x AVAILABLE OPTIONS Operating Voltage 06: 60 VDC Rated Load Current Series 24: 280 VAC 06: 6 Amps DRT A 24 D 06 R Timing Function Control Voltage Switching Type A: A/At, Delay on Make D: 12-24 VAC/DC (24 suffix only) AC B: Single Shot A: 180-240 VAC/DC Blank: Zero Voltage Turn-On Output C: Delay on Break B: 90-140 VAC/DC R: Random Turn-On Only H: H/Ht, Interval L: L/Li, Repeat Cycle Required for valid part number U: Multifunction For options only and not required for valid part number (A/At, H/Ht, D/Di, B, C, Ac & Bw) * Not all part number combinations are available. Contact Crydom Technical Support for information on the availability of a specific part number. (1) OUTPUT SPECIFICATIONS Description DRTx24 DRTx06 Operating Voltage 24-280 VAC (47-440Hz) 1-48 VDC Transient Overvoltage Vpk 600 60 VDC Rated Load Current (2) 6 Arms 6 A Rated Load Current UL508 Motor Controller (2) Arms 3.6 Arms - Minimum Load Current 150 mArms 2.5 mA Maximum Off-State Leakage Current Rated Voltage 0.1 mArms 0.25 mA Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 - Maximum Surge Current (AC output 1 cycle. DC output 10ms) 285/300 Apk (50/60Hz) 60 A Maximum It for Fusing A sec 410/375 (50/60Hz) - Maximum On-State Voltage Drop Rated Current Vpk 1.3 0.3 VDC Maximum On-State Resistance (RDS-ON) Ohms - 0.034 HP rating UL 508/IEC60947 HP (KW) : 240 VAC 1/3 (0.24) - IEC 62314 LC-A FLA 6 A - IEC 62314 LC-B Kw 0.24 - Wire Size min/max (solid/stranded) AWG/ IEC mm (4) 22/12 0.33/3.31 22/12 0.33/3.31 Output Terminal Screw Torque in lb (Nm) 7.0 (0.8) 7.0 (0.8) Do not forget to visit us at: www.crydom.com Copyright 2013 Crydom Inc. Specifications subject to change without notice.Solid State Relay Timer DataSheet (1) INPUT SPECIFICATIONS Description DRTxxxD06 DRTx24A06 DRTx24B06 Control Voltage Range 12-24 VAC/DC 180-280 VAC/DC 90-140 VAC/DC Must Turn-Off Voltage 1 VAC/DC 20 VAC/DC 10 VAC/DC Min Input Current Min Voltage (AC/DC) (for on-state) 7.6/6.3 mA (5) 7.2/7.1 mA 7.6/7.4 mA Maximum Input Current Maximum Voltage 12.1/9.1 mA (6) 9.7/9.6 mA 12.5/12.3 mA Nominal Input Impedance 2K (7) 25K 12K Wire Size min-max (solid/stranded) AWG/ IEC mm (4) 22-16 / 0.33-1.31 22-16 / 0.33-1.31 22-16 / 0.33-1.31 LED Status Indicator (Color) Yes (green) Yes (green) Yes (green) Input Terminal Screw Torque in lb (Nm) 4.4 (0.5) 4.4 (0.5) 4.4 (0.5) Maximum turn-on/off time See note (9) See note (9) See note (9) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 3750 Vrms (8) 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80 C Ambient Storage Temperature Range -40 to 125 C Weight (typical) 1.76 oz (50 g) Housing Material UL 94 V0 Self-extinguishing Terminal Finish Sulfamate Nickel Humidity 5 - 85% Non condensing RoHS Exemption s 5(a), 7(a), 7(c)-I WIRING DIAGRAM (+ / ) Load ( ) INPUT +1/L1 +3/A1 Y1 CONTROL AC/DC CONTROL VOLTAGE Status AC Output (Input) Indicator TIMER 4/A2 2/T1 ( / ) ( ) (10) (+ / ) ( + ) Load INPUT +1/L1 +3/A1 Y1 CONTROL Status DC Output Indicator TIMER AC/DC SUPPLY 4/A2 2/T1 (OUTPUT) ( / ) ( ) Do not forget to visit us at: www.crydom.com Copyright 2013 Crydom Inc. Specifications subject to change without notice. A2 A1 Y1 L1 Load T1 Load