AC03000001200JAC00

333 3 AC, AC-AT www.vishay.com Vishay Draloric Cemented Leaded Wirewound Resistors FEATURES AEC-Q200 qualified AC-AT series High power dissipation in small design Non-flammable coating conforming to UL 94 V-0 Excellent pulse load capability Non-inductive (NI) version available WSZ-form lead bending available for SMD mounting Material categorization: for definitions of compliance LINKS TO ADDITIONAL RESOURCES please see www.vishay.com/doc 99912 3D Models APPLICATIONS The AC series is the perfect choice for general purpose Automotive electronics power applications. The AEC-Q200 qualified AC-AT series Industrial electronics is best suited for automotive applications. The robust Power supplies silicone cement coating can handle challenging ambient and operating conditions. Typical applications include but White goods are not limited to energy meters, power supplies and Pre-charging / discharging applications automotive electronics. For a given application, requirements of ohmic value, rated power, peak voltage, pulse shape, pulse duration, lead bending, and environmental conditions may be submitted to recommend the most suitable product. Various lead forms are available such as RT (radial taped), WSZ (Z-form), DK (double kink), EK (single kink) with defined mounting pitch. STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RESISTANCE RESISTANCE (1) (1) (1) RATED RATED LIMITING RANGE RANGE RANGE RESISTANCE TYPE DISSIPATION DISSIPATION VOLTAGE TCR = TCR = TCR = TOLERANCE P P U -10 ppm/K to +100 ppm/K to 100 ppm/K 40 70 max. -80 ppm/K +180 ppm/K AC01 1 W 0.9 W P x R 0.10 to 33 36 to 2.4 k - 5 % AC01-AT 1 W 0.9 W P x R 0.39 to 33 36 to 2.4 k - 5 % AC03 3 W 2.5 W P x R 0.10 to 390 430 to 3.3 k 3.6 k to 5.1 k 5 % AC03-AT 3 W 2.5 W P x R 0.27 to 390 430 to 3.3 k - 5 % AC04 4 W 3.5 W P x R 0.10 to 620 680 to 6.8 k - 5 % AC04-AT 4 W 3.5 W P x R 0.22 to 620 680 to 6.8 k - 5 % AC05 5 W 4.7 W P x R 0.10 to 910 1.0 k to 10 k - 5 % AC05-AT 5 W 4.7 W P x R 0.62 to 910 1.0 k to 10 k - 5 % AC07 7 W 5.8 W P x R 0.10 to 820 910 to 15 k - 5 % AC07-AT 7 W 5.8 W P x R 1.0 to 820 910 to 15 k - 5 % AC10 10 W 8.4 W P x R 0.22 to 560 620 to 27 k - 5 % AC10-AT 10 W 8.4 W P x R 2.0 to 560 620 to 27 k - 5 % Notes The operating temperature range for these resistors is from -55 C up to 250 C (1) Resistance value to be selected from E24 series Revision: 07-Dec-2020 Document Number: 28730 1 For technical questions, contact: ww1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D AC, AC-AT www.vishay.com Vishay Draloric PART NUMBER AND PRODUCT DESCRIPTION Part Number: AC03000001509JAC00 AC03AT0001509JAC00 A C0 3000 0 015 0 9J A C 0 0 A C0 3 A T 0 0 015 0 9J A C 0 0 TCR / TOLERANCE PACKAGING (1) MODEL VARIANT VALUE SPECIAL MATERIAL CODE CODE AC01000 = AC01 0 = neutral 0 = standard 3 digit value J = 5.0 % (see 00 = standard AC03000 = AC03 1 = RT 1 digit Packaging 2 digit code = AC04000 = AC04 2 = SWI multiplier table) customized (2) AC05000 = AC05 3 = DK SP 20 mm MULTIPLIER version -3 AC07000 = AC07 4 = DK LP 33 mm 7 = *10 -2 AC10000 = AC10 5 = DK LP 17.8 mm 8 = *10 -1 6 = NI Non inductive 9 = *10 0 AC01AT0 = AC01-AT 7 = DK LP 25.4 mm 0 = *10 1 AC03AT0 = AC03-AT 8 = DK SP 25.4 mm 1 = *10 2 AC04AT0 = AC04-AT 9 = AC03/AC03AT-WSZ 2 = *10 AC05AT0 = AC05-AT A = EK 22.5 mm AC07AT0 = AC07-AT B = EK 17.8 mm AC10AT0 = AC10-AT C = EK 25.4 mm D = Cu wire 0.8 mm E = EK 33 mm G = DK SP 33 mm H = EK 20 mm I = DK SP 17.8 mm K = AC05/AC05AT-WSZ Product Description: AC03 15R 5 % AC AC03AT 15R 5 % AC AC03 15R 5 % AC AC03-AT 15R 5 % AC TYPE RESISTANCE TOLERANCE PACKAGING AC01 AC01-AT R10 = 0.1 5 % AC LB AC03 AC03-AT 75R = 75 A1 LC AC04 AC04-AT 27K = 27 k AB LK AC05 AC05-AT AE BM AC07 AC07-AT AC10 AC10-AT Notes AC-AT: it is currently available only for standard axial taped parts and for AC03AT-WSZ, AC05AT-WSZ. Contact us for the availability of AC-AT in other lead termination bending forms (1) RT = radial taped lead bending (refer page 11) SWI = special winding EK = single kink lead bending (refer page 10) DK LP = double kink large pitch lead bending (refer page 10) DK SP = double kink small pitch lead bending (refer page 10) WSZ = Z form leads (refer page 11) (2) For special windings or the non-inductive versions, please contact: ww1resistors vishay.com Revision: 07-Dec-2020 Document Number: 28730 2 For technical questions, contact: ww1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000