PLS150010020

PLS1500 Series PROGRAMMABLE POWER SUPPLIES 1500W The PLS1500 is a programmable DC power supply with a single 1500 Watt output. With 12-bit D/A & A/D converters embedded, the power supplies come with the capability of reporting voltage and current very accurately. The PLS1500 series provides convenient dynamic rotary controls for voltage and current adjustment. The power supplies also come with rear ports that allow remote control via USB, Ethernet, and analog control inputs. The USB and Ethernet inputs are SCPI compliant and have LabView drivers available on the National Instruments website. The PLS1500 series is LXI certified, details for using this interface can be found in the Programming Manual. The units are designed to oerff either bench use or rack mounting. Applications Features 1500W with built-in fan cooling Industrial Laboratory Semiconductor Technology Extendable voltage & current range Electronics Manufacturing 1U rack mount or bench mount Parallel (4 units) or series (2 units) operation (600VDC max) Resource Links Dynamic rotary controls for Voltage & Current Click Here for the Programming Manual Wireless Digital Remote Sense Click Here for the User Manual Built-In Voltage and Current Measurement Embedded 12-bit D/A & A/D converters Analog interface, SCPI compliant USB 2.0 & Ethernet interfaces LabVIEW, IVI & USB drivers, LXI certified Input voltage range 90 to 265VAC Output voltages from 0 to 30/50/100/200/400VDC Overvoltage, overcurrent & overpower protection Self-test & calibration functions 0C to +40C operating temperature 3 year warranty Models & Ratings (1) Model Number Voltage Current Power PLS15003070 30V 70A PLS15005040 50V 40A PLS150010020 100V 20A 1500W PLS150020010 200V 10A PLS15004005 400V 5A Notes: 1. PLS1500 series products are shipped without a mains lead. For mains lead please consult sales. PROGRAMMABLE POWER SUPPLIES PLS1500 Series Specification Note: Unless otherwise stated, specifications are warranted over the ambient temperature range of 0 to 40C. PLS15003070 PLS15005040 PLS150010020 PLS150020010 PLS15004005 Voltage 30V 50V 100V 200V 400V (1) DC Output Ratings Current 70A 40A 20A 10A 5A (3) CV p-p 60mV 100mV 100mV 100mV 200mV Output Ripple & Noise (4) CV rms 20mV 100mV 150mV 150mV 50mV Voltage 15mV 25mV 50mV 100mV 200mV Load Regulation (change from 10% - 90% load) Current 15mA 15mA 15mA 15mA 15mA Voltage 15mV 25mV 50mV 100mV 200mV Line Regulation (6) (change from 100 - 132 or 180 - 260VAC input) Current 15mA 15mA 15mA 15mA 15mA Voltage 0.1%+ 15mV 25mV 50mV 100mV 200mV (1,2) Programming Accuracy Current 0.1%+ 15mA 15mA 15mA 15mA 15mA Voltage 0.1%+ 15mV 25mV 50mV 100mV 200mV Measurement Accuracy Current 0.1%+ 15mA 15mA 15mA 60mA 60mA (5) Transient Recovery Time Time 1ms 1ms 1ms 1ms 1ms Supplemental Characteristics (supplemental characteristics are not warranted but are descriptions of typical performance determined either by design or type testing) Up, Full Load 15ms 30ms 25ms 30ms 35ms Output Response Time (time to settle to within 1% of the rated Down, Full Load 25ms 25ms 25ms 45ms 40ms output, with resistive load) Down, No Load <2.5s 3s 4s 10s 10s (7) Command Response Time Time 50ms 50ms 50ms 50ms 50ms (8) Data Readback Transfer Time Time 5ms 5ms 5ms 5ms 5ms Remote Sense Compensation Volts/Load Lead 1V 1V 2V 4V 4V Range 0.5 - 33V 0.5 - 55V 0.5 - 110V 0.5 - 220V 0.5 - 440V Over-voltage Protection Accuracy 0.3V 0.5V 1V 2V 14V (3) Output Ripple & Noise CC r.m.s. 7mA 5mA 5mA 5mA 10mA Voltage 0.05%+ 10mV 25mV 50mV 100mV 200mV Programming Resolution Measurement Resolution Current 0.05%+ 20mA 20mA 10mA 5mA 2.5mA Voltage 0.1%+ 10mV 25mV 50mV 100mV 200mV Front Panel Display Accuracy Current 0.1%+ 33mA 20mA 10mA 5mA 2.5mA Notes: 1. Minimum voltage is guaranteed at greater than 1% of the rated output voltage. 2. Minimum current is guaranteed at greater than 1% of the rated output current. 3. Measured with 20MHz bandwidth and excluding line frequency ripple. 4. Line frequency ripple measured with 20MHz bandwidth. 5. Time for output voltage to recover within 0.5% of its rated output for a load change from 10 to 90% of its rated output current. 6. Voltage set point from 10% to 100% of rated output up to 20MHz. 7. Add this to the output response time to obtain the total programming time. 8. Time to provide data back to the controller using LAN interface (does not include A/D conversion time). 2