WD201 XP Power

Industrial DC-DC Converters 10-15 Watts THE XPERTS I N POWER WD Series 2:1 Input Range Isolated Outputs Efficiency to 82% 200 kHz Switching Frequency Input Filter Fully Regulated Outputs Six-sided Shield Specification Input General Input Voltage Range 5 V (4.7-9.0 VDC) Switching 200 kHz typical 12 V (9-18 VDC) Frequency 24 V (18-36 VDC) Efficiency See Table 48 V (36-72 VDC) Isolation 500 V DC input to output Input Filter Network (1000 M /80 pF) Dimensions 2.0 x 1.0 x 0.4 Output Weight 35 g Output Power 8 Watts for 5 V input version MTBF 950,000 hours to MIL-STD-217F 10 Watts for 12 V input version 15 Watts for 24 & 48 V input versions Environmental (optional 10 Watts) Operating -25 C to +71 C Voltage Accuracy 1% max Temperature Line Regulation 0.2% max Storage -40 C to +100 C Load Regulation 1% max for a 75% load change Temperature Ripple & Noise 100 mV pK-pK max (20 MHz bandwidth) Safety Temperature 0.02%/C max Safety Approvals UL1950 for LU versions only Coefficient Short Circuit Continuous Protection www.xpplc.com sales xpplc.comDC-DC Converters Industrial DC-DC Converters 10-15 Watts WD Series OUTPUT VOLTAGE & CURRENT RATINGS WD (4) Input Output Output Input Current Efficiency Model (1) (2,3) Voltage Voltage Current No Load Full Load Number 5.0 VDC 1600 mA 15 mA 2130 mA 75% WD501 12.0 VDC 666 mA 15 mA 2100 mA 76% WD502 15.0 VDC 533 mA 15 mA 2100 mA 76% WD503 4.7-9.0 VDC 12.0 VDC 333 mA 15 mA 2100 mA 76% WD504 15.0 VDC 266 mA 15 mA 2100 mA 76% WD505 5.0 VDC 800 mA 15 mA 2100 mA 76% WD506 3.3 VDC 3000 mA 20 mA 1056 mA 76% WD100 5.0 VDC 2000 mA 30 mA 1100 mA 76% WD101 12.0 VDC 830 mA 30 mA 1065 mA 78% WD102 9-18 VDC 15.0 VDC 666 mA 30 mA 1065 mA 78% WD103 12.0 VDC 415 mA 40 mA 1065 mA 78% WD104 15.0 VDC 333 mA 40 mA 1065 mA 78% WD105 5.0 VDC 1000 mA 40 mA 1065 mA 78% WD106 3.3 VDC 3000 mA 20 mA 543 mA 76% WD200 5.0 VDC 3000 mA 20 mA 800 mA 78% WD201 12.0 VDC 1250 mA 20 mA 780 mA 80% WD202 18-36 VDC 15.0 VDC 1000 mA 20 mA 780 mA 80% WD203 12.0 VDC 625 mA 30 mA 780 mA 80% WD204 15.0 VDC 500 mA 30 mA 780 mA 80% WD205 5.0 VDC 1500 mA 30 mA 780 mA 80% WD206 3.3 VDC 3000 mA 15 mA 272 mA 76% WD300 5.0 VDC 3000 mA 10 mA 390 mA 80% WD301 12.0 VDC 1250 mA 10 mA 380 mA 82% WD302 36-72 VDC 15.0 VDC 1000 mA 10 mA 380 mA 82% WD303 12.0 VDC 625 mA 15 mA 380 mA 82% WD304 15.0 VDC 500 mA 15 mA 380 mA 82% WD305 5.0 VDC 1500 mA 15 mA 380 mA 82% WD306 Notes 1. Nominal input voltage 5, 12, 24 or 48 VDC. 2. For optional 10 W version: Add Suffix L to WD2xx and WD3xx, except models WD200 and WD300. 3. UL1950 approvals available on 10 W models only. Add suffix LU to models WD1xx, WD2xx or WD3xx, not available on WD5xx series. 4. Input current is at nominal input voltage. Mechanical Details Dimensions in inches (mm) PIN CONNECTIONS Pin Single Output Dual Output 1 + Input + Input 2 - Input -Input 3 +Output +Output 4 No Pin Common 5 -Output -Output www.xpplc.com sales xpplc.com Rev 3.0