WU201 XP Power

Wide Input DC-DC Converters 10/15 Watts T H E XP E R T S I N P O W E R WU Series 4:1 Input Range Isolated Outputs Efficiency to 84% Overvoltage Protection Input Filter Short Circuit Protected Fully Regulated Outputs Specification Input General Input Voltage Range 5 V (4.5-6.0 VDC) Switching 100 kHz typical 12 V (9-36 VDC) Frequency 48 V (20-72 VDC) Efficiency See Table Input Filter Network Isolation 500 V DC input to output (1000 M/80 pF) Output Dimensions 2.00 x 2.00 x 0.46 Output Power 15 Watts (10 W for 5 & 3,3 V versions) Weight 80 g Output Voltage See Table Environmental Voltage Accuracy 1% max Operating -25 C to +71 C Voltage Trim 5% max on single output models Temperature Line Regulation 1% max Storage -55 C to +125 C Load Regulation 1% max single output models, Temperature 2% for dual & triple output models, for 75% load change Ripple & Noise 1% of Vout max (20 MHz bandwidth) Temperature 0.02%/C max Coefficient Short Circuit Continuous Protection Remote On/Off Standard on triple output models, optional on single & dual output models www.xpplc.com sales xpplc.comDC-DC Converters Wide Input DC-DC Converters 10-15 Watts WU Series OUTPUT VOLTAGE & CURRENT RATINGS WU (1) Input Output Output Input Current Efficiency Model Voltage Voltage Current No Load Full Load Number 4.5-6.0 VDC 15.0 VDC 333 mA 10 mA 2510 mA 79% WU106 5.0 VDC 1500 mA 30 mA 1560 mA 80% WU204 9-36 VDC 12.0 VDC 625 mA 30 mA 1540 mA 81% WU205 15.0 VDC 500 mA 30 mA 1520 mA 82% WU206 5.0/12.0 VDC 1500/310 mA 20 mA 1576 mA 79% WU207 5.0/5.0 VDC 1500/250 mA 20 mA 1582 mA 79% WU208 5.0 VDC 1500 mA 20 mA 760 mA 82% WU304 12.0 VDC 625 mA 20 mA 750 mA 83% WU305 20-72 VDC 15.0 VDC 500 mA 20 mA 745 mA 84% WU306 5.0/12.0 VDC 1500/310 mA 15 mA 778 mA 80% WU307 5.0/15.0 VDC 1500/250 mA 15 mA 781 mA 80% WU308 Notes 1. Input current is at nominal input voltage. Mechanical Details Single & Dual Output Models Triple Output Models Dimensions in inches (mm) EXTERNAL OUTPUT TRIMMING PIN CONNECTIONS Pin Single Output Dual Output Triple Output Output may optionally be externally trimmed (5%) with a fixed resistor or an external trimpot as shown. 1 + Input + Input Remote ON/OFF 2 - Input - Input - Input 3 + Output + Output + Input 4 Trim Common - Output 5 - Output - Output Common 6 Remote ON/OFF Remote ON/OFF 5 VDC Output 7- - + Output NOTES: REMOTE ON/OFF CONTROL 1. Voltage accuracy on 3 VDC and triple outputs 3% max. Single outputs can be - ON >5.5 VDC or Open Circuit trimmed 5%. - OFF <1.8 VDC 2. Load regulation 2% for dual and triple outputs. Shutdown Idle Current 10 mA 3. Triple outputs require minimum of 10% load for rated performance. 4. Remote ON/OFF standard on triple output units, add suffix E to model number for Input Resistance (E 0 VDC to 9 VDC) 100 k in option on single and dual output units. Remote ON/OFF Common Referenced to -Input 5. Pin 6 is only fitted on single and dual output models with E suffix. www.xpplc.com sales xpplc.com Rev 3.0