CleO35A

CleO35 Module Datasheet Version 1.2 Document Reference No.: BRT 000015 Clearance No.: BRT 024 Bridgetek Pte Ltd Datasheet CleO35 Module 1.1 Features 1 Introduction CleO35 utilises the Bridgetek FT903 low power MCU to CleO35 is a smart TFT display shield for Arduino. It bridge between the Arduino and fast interface includes a 3.5 inch 320x480 pixel TFT LCD panel accessories such as camera and SD Card input. For a with resistive touch, PWM audio output with in- full list of the FT903s features please see the FT90X built speaker amplifier for better audio quality. For datasheet .In addition, the CleO35 has the following the convenience of user, speaker cable with 1X4 features: socket to 2 pin wire ended and 1X2 socket is provided. User can use their own speaker. Landscape and portrait modes supported In built Bridgetek FT810 embedded video engine (EVE) graphic controller These smart TFT display shields can be easily programmed by almost anyone to give Anti-Aliased graphics throughout for much finer professional looking HMI / GUI s with no prior image quality with nojaggie. knowledge of complex graphics programming or mathematics. Ready to use LCD module with resistive touch in panel mountable bezel. Micro SD card socket support. In built 8M Byte Eflash memory USB DFU port for firmware updates Support camera interface PWM audio supported and in built speaker amplifier Designed as Arduino and NerO shield Compatible with Bridgetek CleO-RIO, CleO- Camera and CleO-Speaker. CE and FCC certified Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Bridgetek Pte Ltd, 178 Paya Lebar Road, 07-03, Singapore 409030. Singapore Registered Company Number: 201542387H Copyright Bridgetek Pte Ltd 1 CleO35 Module Datasheet Version 1.2 Document Reference No.: BRT 000015 Clearance No.: BRT 024 2 Ordering Information Part No. Description CleO35 module, with FPC/FFC 50 LCD connector, 3.5 inch TFT LCD display CleO35A panel preinstalled, with resistive touch. Black bezel. CleO-RIO1 Arduino Shield for users to stack Arduino board on bottom of CleO35. CleO-CAM1 A camera plug-in module for CleO35. CleO-SPK1 A speaker enclosure with connecting wires to CleO35. 3 Program Support The demo applications are provided for CleO35 modules by Bridgetek. Visit Bridgeteks website at