BU-CRIMPER

BU-CRIMPER (Alligator Clip Crimping Tool) Size: Length = 7 (178mm), Width at jaws = .25 (6.4mm) Will work with the following Mueller Alligator Clips: BU-30BL Use with 2nd die (furthest hole) on crimper BU-60 Use with 1st die (front hole) on crimper BU-60S Use with 1st die (front hole) on crimper BU-60C Use with 1st die (front hole) on crimper BU-60CS Use with 1st die (front hole) on crimper BU-60M Use with 1st die (front hole) on crimper BU-60X Use with 1st die (front hole) on crimper BU-P2240-* Use with 1st die (front hole) on crimper BU-P6567 Use with 1st die (front hole) on crimper IMPORTANT See the following page for crimping instructions. Mueller Electric Company Toll Free: 800.955.2629 2850 Gilchrist Rd. Bld 5A www.muellerelectric.com Phone: 330.780.2525 Akron, OH 44305 Fax: 330.780.2524 Crimping Instructions 1) Strip the wire and fold the end back on itself 2) Insert the wire into the clip (folded end facing the bottom of the alligator clip) 3) Important Align the clip such that the tooth of the crimper faces the bottom of the clip. Squeeze tight on the crimpers handles. 4) Final crimped alligator clip should look as shown with the tooth mark on the bottom of the clip. Mueller Electric Company Toll Free: 800.955.2629 2850 Gilchrist Rd. Bld 5A www.muellerelectric.com Phone: 330.780.2525 Akron, OH 44305 Fax: 330.780.2524