10150-8000EE 3M

3M Mini D Ribbon (MDR) Connectors .050 IDC Wiremount Plug - Non Shielded 101 Series Wiper-on-wiper contact for reliable repetitive plugging Interface latch design for connection stability Mass terminates to .025 pitch flat ribbon cable Contacts: 50 and 68 See Regulatory Information Appendix (RIA) for chemical compliance information. TS-0514-10 Date Modified February 22, 2007 Sheet 1 of 2 Physical Insulation Material: Glass Reinforced Polyester Flammability: UL 94V-0 Color: Black Contact Material: Beryllium Copper Plating Underplating: 80 2.0 m Nickel Wiping Area: 30 0.76 m Min. Gold Insulation Displacement Contact: See Ordering Information Shroud Material: Steel Plating: Nickel Wire Accommodation: 30 AWG Solid (.025 Pitch Flat Cable) Marking: 3M Logo and Part Identification Number Electrical Current Rating: 1 A 8 Insulation Resistance: > 5 10 at 500 V DC 500 V for 1 Minute Withstanding Voltage: RMS Environmental Temperature Rating: -20C to +85C UL File No.: E68080 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Mini D Ribbon (MDR) Connectors .050 IDC Wiremount Plug - Non Shielded 101 Series Contact Dimensions Quantity A B C D E F 50 1.20 30.48 1.45 36.9 1.65 41.9 1.65 41.9 1.83 46.6 2.02 51.2 68 1.65 41.9 1.91 48.4 2.10 53.3 2.10 53.3 2.28 58.0 2.46 62.6 .394 F 10.0 3M 101XX .860 21.84 Strain Relief .268 6.8 E .394 10.0 D .917 .394 23.3 3M 101XX 10.0 .331 Cover 8.40 Connector and Strain Relief Assembly .248 .067 6.3 1.70 .394 10.0 .025 (IDC Contact Spacing) .64 .437 11.1 C .319 8.1 .20 Body 5.1 Position of 1st Conductor in cable .394 10.0 B .319 Position of 3rd Conductor 8.1 Inch mm .394 Tolerance Unless Noted 10.0 .050 1.27 .0 .00 .000 A inch .1 .01 .005 Position of 2nd Conductor Position of Last Conductor in cable Dimensions for Reference Only Ordering Information 101XX-8X00EE Contact Quantity (See Table) Insulation Displacement Contact Plating 0 = with Strain Relief (Standard) E = Gold Flash (RIA E1 & C1 Apply) 1 = without Strain Relief (Special Order) Note: Assembly tools: 3M Press 3640 (or equivalent). 3M Locator Plate 10980--3 3M Platen 10981--5 platen and 3M TS-0514-10 Shut Height Gage Block 10982. Sheet 2 of 2 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call