10220-2210PE 3M

3M Mini D Ribbon (MDR) Connectors .050 Surfacemount Vertical Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Interface latch design for connection stability IEEE 1284C Interface as a 36 contact connector Contacts: 20, 26 and 36 See Regulatory Information Appendix (RIA) for chemical compliance information. TS-0638-11 Date Modified: February 21, 2007 Sheet 1 of 3 Physical Insulation Material: Glass Reinforced Polyester (PCT) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy Plating Underplating: 80 2.0 m Nickel Wiping Area: 20 0.50 m Min Gold Solder Tails: See Ordering Information Body Material: Zinc Alloy Plating: Nickel Shroud Material: Steel Plating: Nickel Marking: 3M Logo and Part Number Electrical Current Rating: 1 A 8 Insulation Resistance: > 5 10 at 500 V DC 500 V for 1 Minute Withstanding Voltage: RMS Environmental Temperature Rating: -55C to +105C Process Rating: 260C (profile per J-STD-020C) UL File No.: E68080 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Mini D Ribbon (MDR) Connectors .050 Surfacemount Vertical Receptacle - Shielded 102 Series Pos. AB C D E 20 1.315 33.40 0.879 22.32 1.081 27.45 0.65 16.41 0.450 11.43 26 1.465 37.21 1.029 26.13 1.231 31.26 0.80 20.22 0.600 15.24 36 1.715 43.56 1.279 32.48 1.481 37.61 1.05 26.57 0.850 21.59 A C E .050 1.27 .14 3.5 2X Positioning Boss B .06 1.5 .23 .005 .016 .083 5.8 0.4 2.1 0.13 .061 1.55 .14 3.5 D .20 5.2 2X 0.138 .285 3.5 7.24 Position 2 Position 1 PCB Lockdown Thread .40 .36 10.1 9.1 Inch mm Tolerance Unless Noted .25 .050 Last Position 6.3 .0 .00 .000 1.27 Position 0 inch .1 .01 .005 15 Dimensions for Reference Note: Only 1. Solder tail tips are formed away from board, so tip dimension is greater than footprint total width. Ordering Information 102XX-22X0XE Contact Quantity Solder Tail Plating: V = Tin-Lead over nickel (RIA E3 & C2 Apply) P = Gold flash over nickel (RIA E1 & C1 Apply) Panel / Board Retention Feature: 0 = M2.6 (special order) 1 = M2.5 (standard - See note 2) TS-0638-11 Note: Sheet 2 of 3 2. When using the 3M Jacksocket 3341-31 and CameraLink cable assembly, the 3M connector part number is 10226-2210VE. 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call