3M Mini D Ribbon (MDR) Connectors .050 Surface Mount Right Angle Die-Cast Receptacle Shielded 102 Series Rugged die-cast body resists tipping during automated soldering operations Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission Interface latch design for connection stability Suitable for thumbscrew attach (see TS-0142 for available hardware) MDR digital LCD interface as a 20 or 26 contact connector Camera Link interface as a 26 contact connector Contacts: 14, 20, 26, 40 and 50 See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3mconnector.com for compliance information Date Modified: October 27, 2010 TS2242B Sheet 1 of 3 Physical Body Material: Glass Reinforced Polyester (PCT), Natural Color Flammability: UL 94V-0 Alignment Plate Material: LCP, Natural Color Flammability: UL 94V-0 Contact Material: Copper Alloy Underplating: 80 2 m Nickel Wiping Area Plating: See Ordering Information Solder Tail Plating: Flash Gold over Nickel (RIA E1 & C1 apply) Shroud Material: Steel Plating: Nickel Lock Stand Material: Zinc Alloy Plating: Nickel Electrical Current Rating: 1 A 8 Insulation Resistance: >5 x 10 at 500 V DC Withstanding Voltage: 500 V for 1 minute rms Environmental Temperature Rating: -55 C to +85 C Process Rating: 240C- 250C peak temperature for less than 10 secs., 220C soldering for 30 60 secs. after 150C - 180C preheat for 90 120 secs. (reflow two times) UL File No.: E68080 Camera Link is a trademark of Automated Imaging Assocition 3 3M is a trademark of the 3M Company Interconnect Solutions For technical, sales or ordering information call 3M Mini D Ribbon (MDR) Connectors .050 Surface Mount Right Angle Die-Cast Receptacle Shielded 102 Series DIM. A TAIL COPLANARITY DIM. B 0.00 TO 0.10 DIM. C 9.35 0.635 .368 .025 9.1 0.25 .36 M2.5 MARK PIN 1.20 T .010 .047 MARK PIN 7.2 DIM. D T .28 DIM. E T-T MARK PIN M2.5 DIM. F 15 FLAT FIXTURE SURFACE DETAIL-N N MARK PIN 1.9 1.270.10 .07 .0500.004 DIM. G DIM. H Contact DIM A DIM B DIM C DIM D DIM E DIM F DIM G DIM H mm Quantity (inch) 29.5 23.64 8.255 17.1 19.5 12.6 7.62 12.70 14 Tolerance Unless Noted (1.16) (.931) (.325) (.67) (.77) (.50) (.300) (.500) .0 .00 .000 33.3 27.45 12.065 21.0 23.4 16.4 11.43 16.51 20 (1.31) (1.081) (.475) (.83) (.92) (.65) (.450) (.650) mm .3 .15 .150 37.2 31.26 15.875 24.8 27.2 20.2 15.24 20.32 ( ) Dimensions used for 26 (1.46) (1.231) (.625) (.98) (1.07) (.80) (.600) (.800) Reference Only 46.1 40.15 24.765 33.7 36.1 29.1 24.13 29.21 40 (1.81) (1.581) (.975) (1.33) (1.42) (1.15) (.950) (1.150) TS2242B 52.4 46.50 31.115 40.0 42.4 35.5 30.48 35.56 50 Sheet 2 of 3 (2.06) (1.831) (1.225) (1.57) (1.67) (1.40) (1.200) (1.400) Ordering Information 102XX-1S10 PX Contact Quantity Wiping Area Plating: See Table L = 8 min. Gold with Lubricant Treatment E = 20 min. Gold 3 3M is a trademark of the 3M Company For technical, sales or ordering information call Interconnect Solutions 800-225-5373