31-8-W 3M

Specialty Terminals W BS-31-4S-W thru BS-33-10-W Block Fork, Non-Insulated, Brazed Seam C L E Data Sheet Wire Product Range Stud Barrel Barrel Number (AWG)SWize C L E Thickness Length I.D. B8S-31-4S-W242-1 05.2505.200.600.505.03 00.2 0.07 B8S-31-6S-W262-1 05.2505.200.600.505.03 00..2 0.07 B8S-31-6-W 262-1 05.3005.200.600.505.03 00.2 0.07 B8S-31-8-W 282-1 05.3005.200.600.505.03 00.2 0.07 B8S-31-10-W202-1 1005.305.200.600.505.03 00.2 0.07 B4S-32-4S-W146-1 05.2505.200.600.505.03 00.2 0.09 B4S-32-6S-W166-1 05.2505.200.600.505.03 00.2 0.09 B4S-32-6-W 166-1 05.3005.200.600.505.03 00.2 0.09 B4S-32-8-W 186-1 05.3005.200.600.505.03 00.2 0.09 B4S-32-10-W106-1 1005.305.200.600.505.03 00.2 0.09 B0S-33-6-W 162-1 09.3203.204.700.505.04 05.2 0.13 B0S-33-8-W 182-1 09.3203.204.700.505.04 05.2 0.13 B0S-33-10-W102-1 1209.303.204.700.505.04 05.2 0.13 Installation Information WARNING Turn power off before installing or removing terminal. All electrical CANADIAN STANDARDS work should be done according to appropriate electrical codes. LISTED 314R ASSOCIATION UNDERWRITERS STANDARD NO. C22.2 LABORATORIES NO. 0. 65 UL Listed and CSA Certified for use on stranded copper STANDARD NO. UL 486A 3M FILE NO. LR22190 (AWG) wire only. 3M FILE NO. E23438 Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended Wire Size: See Table Above 3M crimp tool: TH-440, TH-450 (scissor style), or Barrel Seam: Brazed TR-490 (ratchet style) hand tools. Max. Current: Same as Wire Terminal Material: ETP Copper Barrel Crimp (Electrical) Plating: TinEngineering Specification Crimp-type terminals shall, electrically and The non-insulated, brazed seam block fork terminal mechanically, connect to a pre-stripped end of a shall be tin-plated, annealed copper, with the tongue stranded copper wire and have a flat tongue portion having a specified stud slot (size 4 thru 10) and a with a central opening for mounting around a screw or brazed seam barrel with a beveled I.D. for ease of stud. stranded wire entry, sized for a specified (AWG) wire range (22-18, 16-14, 12-10). The terminal line shall offer tongue variations in hole (stud) size (6, 8 10, etc.) and configuration (ring, fork, Non-insulated terminals shall be UL Listed and CSA block fork, flanged block fork, locking fork, etc.): and Certified. barrel variations in wire (AWG) size (22-18, 16-14, 12-10, etc.) and construction (non-insulated brazed seam, vinyl insulated butted seam, nylon insulated with insulation grip, etc.). The terminal line shall have regulatory agency coverage (UL Listing, CSA Certification). The terminal tongue shall be marked with the wire range and manufacturers symbol ( ). 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.