Scotch Super 33+ Vinyl Electrical Tape Data Sheet October 2014 Description Scotch Super 33+ Vinyl Electrical Tape is a premium grade, 7 mil thick, all-weather vinyl-insulating tape. It is designed to perform continuously in ambient temperatures up to 105C (220F). The tape is conformable for cold weather application down to -18C (0F). It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion and varying weather conditions (including ultraviolet exposure). The combination of elastic backing and aggressive adhesive provides moisture-tight electrical and mechanical protection with minimum bulk. Scotch Super 33+ Vinyl Electrical Tape is UL Listed and is a Canadian Standards Association (CSA) Certified Insulating Tape. UL Listed UL 510 Standard Insulating Tape (product category OANZ), File E129200 CSA Certification Standard C22.2 No.197-M1983 PVC Insulating Tape, File LR 48769 Polyvinyl chloride (PVC) backing. Pressure-sensitive rubber based adhesive. Compatible with solid dielectric cable insulations. Compatible with rubber and synthetic splicing compounds, as well as epoxy and polyurethane resins. Inhibits corrosion of electrical conductors. For indoor or outdoor applications. Applications Primary electrical insulation for all wire and cable splices rated up to 600 volts and up to 105C (220F). Primary electrical insulation for 600 volt bus applications, and protective jacketing for low and high voltage bus. Protective jacketing for high voltage cable splices and repairs. Harnessing of wires and cables. Scotch Super 33+ Vinyl Electrical Tape is based on polyvinyl chloride (PVC) and/or Specifications its copolymers and has a rubber-based, pressure-sensitive adhesive. The tape shall be 7 mils thick, and be UL Listed and marked per UL Standard 510 as Flame Retardant, Cold and Sunlight Resistant. The tape must be applicable at temperatures ranging from 0F through 100F (-18C through 38C) without loss of physical properties. The tape shall be classified for use in both indoor and outdoor environments. The tape shall be compatible with synthetic cable insulations, jackets and splicing compounds. The tape will remain stable and will not telescope more than 0.1 inches when maintained at temperatures below 120F (50C). 1 of 3 Scotch Super 33+ Vinyl Electrical Tape Agency Approvals UL Listed UL 510 Standard Insulating Tape (product category OANZ), & Self Certifications File E129200 CSA Certification Standard C22.2 No.197-M1983 PVC Insulating Tape, File LR 48769 Meets A-A-55809 For RoHS information, please visit www.3M.com/ROHS Not for specifications. Values are typical, not to be considered minimum or maximum. Typical Properties Properties measured at room temperature 73F (23C) unless otherwise stated. Physical Properties Typical Value US units (metric) Temperature Rating - UL 510 176F (80C) CSA - C22.2 No. 197-M1983 handling 0F (-18C) continuous operation 221F (105C) Color BLACK Thickness 7 mils (0.177 mm) Adhesion to Steel (ASTMD 1000) 72F (22C) 28 oz/in. 0F (-18C) 60 oz/in. Adhesion to Backing (ASTMD 1000) 28 oz/in. 72F (22C) 60 oz/in. 0F (-18C) Backing Strength (ASTMD 1000) 15 lbs/in. 72F (22C) Ultimate Elongation (ASTMD 1000) 72F (22C) 250%. 0F (-18C) 100% Flammability (Maximum) UL 510 1 sec. ASTM D-1000 4 sec. Accelerated Aging (ASTM D-1000) 80% <0.1 in. Flagging (ASTM D-1000) Telescoping <0.1 in 24 Hours 120F (50C) Typical Value Electrical Property US units Voltage Rating - UL 510 600V Dielectric Strength (ASTM D-1000) Standard Condition 1,150 V/mil V/mil High Humidity 90% of std. Insulation Resistance (ASTM D-1000) 6 ( High Humidity Method) >1x10 megohms 2 of 3