3M D Sub EMI Junction Shell 50 Position Cast aluminum shell provides EMI/ESD protection Spring latch allows positive, quick and easy connect and disconnect Strain relief compensates for various round cable outside diameters Nickel plating provides attractive and corrosion-resistant features RoHS* compliant Date Modified: January 15, 2007 TS-0245-08 Sheet 1 of 2 Physical Junction Shell Kit Hardware Included: (2) Shell Halves - Die Cast Aluminum Alloy, Clear Chromate (2) 8 32 3/8 - Steel, Zinc (2) Latch - Stainless Steel (1) Tape Strip Latch Bracket Kit Hardware Included: (1) Bracket - Stainless Steel (2) Screws 4-40 7/16 - Steel, Zinc (6) Flat Washers - Steel, Zinc (2) Spring Washers - Steel, ZincRoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M s knowledge and belief based upon information provided by third party suppliers to 3M. 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M D Sub EMI Junction Shell 50 Position 0.75 19.0 0.58 14.7 2.0 51.0 3.37 85.6 Junction Shell Inch m m Tolerance Unless Noted .0 .00 .000 inch .1 .01 .005 2.20 Dim ensions for R eference 55.9 Only 0.75 0.520 19.0 13.21 0.42 10.7 2.406 61.11 0.035 0.89 3.28 83.3 Latch Bracket Note: Maximum Panel Thickness for Latch Bracket is 3/32 . Ordering Information Junction Shell Latch Bracket (Order Separately) 3357-9250 3505-62 TS-0245-08 Sheet 2 of 2 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call