40 Printed and Unprinted Antistatic Utility Tape Data Sheet 3M 40 Printed and Unprinted Antistatic Utility Tapes Applications represent a breakthrough in PSA tape technology. This Office/Clean Room/Work Station new tape, which generates less than 50 volts on unwind Holding notes of work orders and removal from stainless steel, helps prevent ESD Holding obstruction down damage to sensitive electronic components in Third hand, general purpose manufacturing environments. Triboelectric charge may Manufacturing vary with your application and Close static shielding bags environment. Conformal coating/maskins Holding and sealing supplies Patented Technology Packaging Box, bag and container sealing/holding DIP Tubes 3M antistatic utility tape is a Removing Contaminants transparent polyester film tape Label Stock with acrylic adhesive. Made with a proprietary technology, the tape Call 1-800-328-1368 for more information or the name generates extremely low levels of of your nearest 3M ELPD Division authorized triboelectric charge when it is distributor. unwound from the roll and also when removed from most surfaces Typical Properties on which it is placed. This makes Property/Unit of Measure Test Method Typical Value the tape an excellent choice for use ELECTRICAL PROPERTIES near electronic components and assemblies. The tape is supplied on Static charge generation: 36 yard and 72 yard rolls on 1 and Removal from roll, 3 cores. 10% RH, volts 3M 20 Removal from roll, 50% RH, volts 3M 5 Superior Performance Removal from stainless steel, 10% RH, volts 3M 50 3M antistatic utility tape can be Removal from stainless used at static-safeguard steel, 50% RH, volts 3M 5 workstations as part of your total static control program. It Surface resistance: generates very low levels of static 6 Adhesive 50% RH, ESD Assoc. 5 x 10 charge even in dry conditions of STD 11.11 10% RH. The tape is supplied on a 6 Adhesive 10% RH, ESD Assoc. 5 x 10 paper core antistatic plastic cores STD 11.11 are available to minimize particulate contamination in clean work areas. TAPE PROPERTIES Adhesion to steel, oz/inch ASTM D 1000 15 Unwind force from roll, oz/inch ASTM D 1000 24 40 Printed for Protection Thickness, mils ASTM D 1000 2.2 Break strength, lb./inch ASTM D 1000 20 The tape is printed on the adhesive side with the 3M Slit width, inch ASTM D 1000 1/64 logo and the ESD Protective Symbol. This reminds workers that 40 tape is the only utility tape you allow in Non - outgassing static-safeguarded areas. TML ASTM E 595 <1.0% CVCM ASTM E 595 <0.1%3M is a trademark of 3M Important Notice All statements, technical information, and recommendations related to Sellers including but not limited to the implied warranties of merchantability and fitness products are based on information believed to be reliable, but the accuracy or for a particular purpose which warranties are hereby expressly disclaimed. completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON assumes all risks and liability whatsoever in connection with such use. UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY Any statements or recommendations of the Seller which are not contained in DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL the Sellers current publications shall have no force or effect unless contained DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY in an agreement signed by an authorized office of Seller. The statements OF THE SELLERS PRODUCTS THAT WERE DEFECTIVE. contained herein are made in lieu of all warranties, express or implied, Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 800 676 8381 3M 1998