: 4430 is a white double Product Description coated synthetic foam tape with a high tack acrylic plain white paper liner. Acrylic 3M ref : 560 kg/m Thickness 0.8 mm 0.1mm White Paper White Tape Colour 12 months from date of despatch by 3M when stored in the Shelf Life original carton at 21C (70F) & 50 % Relative Humidity 20 N/10mm Peel Adhesion to 90 peel room temp, 72 hr dwell, jaw speed 300mm/min weight held for 100 hours to stainless steel 500g 70 C with sq in (3.23 sq cm) overlap C C Intermittent 100 Continuous 70 Performance Temperature Static Shear Strength 1000g 20C Not for specification purposes Stainless Steel Characteristics Performance Release Liner Tape (ASTM D-3652) Foam Density Foam Core Synthetic Not for specification purposes Adhesive Type Physical Properties adhesive. This tape has a Supersedes : October 1993 Updated Product Data Sheet 4430 Double Coated Foam Tape Scotch-Mount2 Date : Tape This product is suitable for Additional Product Information NOT SUITABLE FOR LOW 1. Bond strength is surfaces must be clean dry Initial tape application to Application Techniques and well unified. A typical surface cleaning solvent is below 10C (50F) is not contact developed. Firm isopropyl alcohol & water. application pressure adhesive becomes too firm precautions for handling contact & thus improves solvents. bond strength. temperature holding is 3. Ideal tape application generally satisfactory. 2. To obtain optimum to 38C (70F to 100F). trunking Signing applications - low within cabinets or on performance. furniture. Furniture trim bonding. Point of sale bonding applications using board, Cable clips & air paper and most plastics. bonding. 3M and Scotch-Mount are trademarks of the 3M company. Specialty Tapes & Adhesives 3M Ireland 3M House, 3M House, Adelphi Centre, 28 Great Jackson Street, Tel 0161 236 8500 Upper Georges Street, Tel (01) 280 3555 Manchester, Fax 0161 237 1105 Fax (01) 280 3509 Ireland M15 4PA Laoghaire,Co. Dublin, Dun Customer Service : Customer Service : 3M United Kingdom PLC 3M United Kingdom PLC 1996 recommendations. This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our determine their suitability for your applications. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to Values presented have been determined by standard test methods and are average values not to be used for specification purposes. freshener, Applications Bonding cable adhesion, the bonding temperature range is 21C once properly applied low to adhere readily. However develops better adhesive Use proper safety recommended because the of adhesive-to-surface surfaces at temperatures dependent upon the amount PLASTICS. SURFACE ENERGY plasticised PVC BUT IS 4430 Double Coated Foam October 1993