TM 3M 4520 Protective Coverall Sizing The 3M 4520 Protective Coveralls are designed to help protect against An appropriate size garment should be selected to allow sufficient hazardous dusts (Type 5) and light liquid splashes (Type 6). movement for the task whilst maintaining a secure fit. Height Chest Key Features S 64 67 in 33 - 36 in 84 92 cm 164 170 cm Innovative, lightweight material offering excellent breathability leading to M 66 69 in 167 176 cm 36 39 in 92 100 cm improved comfort L 69 71 in 174 181 cm 39 43 in 100 108 cm Good protection against dusts and certain light liquid splashes Elasticated waist and ankles for convenience and freedom of movement XL 70 74 in 179 187 cm 43 45 in 108 115 cm and knitted cuffs for extra comfort XXL 73 76 in 186 194 cm 45 49 in 115 124 cm Three-panel hood design for a better fit and compatibility with other PPE 3XL 76 78 in 194 200 cm 49 52 in 124 132 cm Two-way zipper and storm flap with tape tabs for enhanced protection Reinforced gusset 4XL 78 81 in 200 206 cm 52 55 in 132 140 cm Low-linting properties and anti-static coating on both sides* Storage and Disposal Comfort and Protection Store in dry, clean conditions in original packaging, away from direct Liquid Type 6 - Light Liquid Splashes sunlight, sources of high temperature, and solvent vapours (EN 13034:2005 + A1:2009) Protection Store within the temperature range -20C to +25C (-4F to +68F) and with relative humidity below 80% Type 5 - Solid Airborne Particulates Dust EN ISO 13982-1:2004 Expected shelf life is three years from date of manufacture when stored as Protection stated Replace garments if damaged, heavily contaminated or in accordance with Anti-static coating* on both sides Anti-static local work practice or regulations (EN 1149-5:2008) Handle and dispose of contaminated garments with care and in Radioactive particulates accordance with applicable regulations Nuclear (EN 1073-2:2002) Class 1 Limited Use Except EN863 puncture resistance. Does not offer protection against radiation. * All apparel must be suitably grounded for anti-static treatment to be effective. Do not wash Do not dry clean Approvals Flammable keep away Do not bleach from sparks or flames CE approved under PPE Directive (89/686/ECC), Category III Article 10 Certification: BTTG Testing & Certification Ltd. Notified Body Number: 0338 Do not iron Article 11B Supervision: SGS United Kingdom Ltd. Single Use - do not re-use Notified Body Number: 0120 Do not tumble dry Materials Warnings and Limitations Suit SMMMS Polypropylene (white) Before use read and understand all user instructions and be sure that Back Panel SMMMS Polypropylene (green) the product is suitable for the application and fitted correctly. Product must never be altered or modified. Zipper Metal / Nylon / Polyester Braid Do not use for: Elastic Neoprene Rubber Contact with heavy oils, sparks or flame, or combustible liquids Environments with high mechanical risks (abrasions, tears, cuts) Contact with hazardous substances beyond Type 5/6 certification Cuffs Polyester Environments with conditions of excessive heat. Thread Polyester / Cotton This product does not contain components made from natural rubber latex. Applications and Performance The table below shows the performance of this product when tested under Non-Hazardous Light Liquid Yes if chemical is compatible laboratory conditions. Please note that the tests may not reflect the reality of Yes Particulates Splash with suit material use and do not account for factors such as excessive heat and mechanical wear. Note: The maximum class is 6 unless otherwise noted. Non-Hazardous Heavy Splash/ Yes No Liquid Splash Liquid Spray Standard/ Class/ Test Hazardous Dusts Organic Test Method Result Yes No and Fibres Solvents Abrasion resistance (visual assessment) EN 530:1994 Class1 Liquid Continuous Yes if chemical is compatible Flex cracking (visual assessment) ISO 7854:1995 Class5 No Acids/Alkalis Contact/ Immersion with suit material Tear resistance ISO 9073-4 :1997 Class 1 Gases No Tensile strength EN ISO 13934-1:1999 Class 1 and Vapours Puncture resistance EN 863:1995 Class 1 The chemicals against which the product has been tested and certified are listed in Bursting resistance EN ISO 13938-1 Class 1 the user instructions. For additional chemical penetration data, please contact 3M on Resistance to ignition EN 13274-4:2001 Pass 0870 60 800 60 (UK) or 1 800 320 500 (Ireland). Seam strength EN ISO 13935-2:1999 Class2 Typical applications may include: industrial clean-up and maintenance, Repellency to liquids 30% H SO EN ISO 6530:2005 Class 3 of 3 2 4 light-duty building cleaning, insulation laying, metal polishing, pesticide Liquid penetration resistance 30% H SO EN ISO 6530:2005 Class 3 of 3 handling/agriculture (particulate aerosols only), woodworking, and 2 4 powder handling. In all cases, a risk assessment should be carried out. Repellency to liquids 10% NaOH EN ISO 6530:2005 Class 3 of 3 Always read product user information. Use limitations and Liquid penetration resistance 10% NaOH EN ISO 6530:2005 Class 3 of 3 performance data should be considered to ascertain the protection required. If in doubt, contact a safety professional. Anti-static coating on both sides EN 1149-1:2006 Pass Radioactive particulates (TIL) EN 1073-2:2002 Class 1 of 3 Important Notice This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE will depend on the particular situation and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE. Final determination as to the suitability of these products for a particular situation is the employers responsibility. This information is subject to revision at any time. Always read and follow all User Instructions supplied with your 3M Protective Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service. LIMITATION OF LIABILITY: Except as provided above, 3M shall not be liable or responsible for any loss or damage, whether direct, indirect, incidental, special or consequential arising out of the sale, use or misuse of 3M OH&ESD products, or the users inability to use such products. 3M Health & Safety Helpline 0870 60 800 60 (UK) 1 800 320 500 (Ireland) 3M Safety Solutions 3M United Kingdom 3M Ireland Limited 3M Centre The Iveagh Building Cain Road, Bracknell The Park, Carrickmines Please recycle. Printed in United Kingdom Berkshire RG12 8HT 3M 2011. All rights reserved Dublin 18 Tel: 0870 60 800 60 Tel: 1 800 320 500 www.3M.co.uk/ohes CH4520DS Iss 4