4036 page 1 of 2 Multi Gas/Vapor Cartridges Issue Date 9/1/09 Cartridge Selection Simplified 3M Multi Gas/Vapor Cartridges combine the protection offered by five different cartridges into one simple-to-use cartridge. Simplicity 3M multi gas/vapor cartridges help: Simplify cartridge selection and respirator training. Reduce inventory costs. 3M multi gas/vapor cartridges are also available with permanently attached P100 filters. Versatility The multi gas/vapor cartridges can be used with a variety of 3M Multi Gas/Vapor Cartridges shown with 3M Full Facepiece 3M facepieces: 6000 Series and 3M Organic Vapor Monitor 3510. 3M Half Face and Full Facepieces 6000, 7000 and Ultimate FX FF-400 Series. Protection 3M multi gas/vapor cartridges Cartridges offer protection are NIOSH approved for ten against a wide range of WARNING types of contaminants: contaminants found in many These cartridges help protect against certain airborne different industries, including: Organic Vapors contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand Petrochemical and Chlorine User Instructions provided as a part of product packaging. chemical processing Time use limitations may apply. For proper use, see Hydrogen Chloride package instructions, supervisor or call 3M OH&ESD Utilities Technical Service in U.S.A., 1-800-243-4630. In Canada, Sulfur Dioxide call 1-800-267-4414. Hydrogen Fluoride Mining Chlorine Dioxide Pulp and paper manufacturing Additional use instructions, Hydrogen Sulfide Pharmaceuticals product limitations, approval Ammonia labels, and warnings are Methylamine included with each facepiece Formaldehyde and filter package.4036 3M Multi Gas/Vapor Cartridges page 2 of 2 Ordering Information Product Description Quantity Number 6006 Multi gas/vapor cartridge 60/case 60926 Multi gas/vaporP100 cartridge 60/case 3M Multi gas/vapor Cartridges are approved for use with the 3M 6000, 7000 and Ultimate FX FF-400 Series Facepieces. All multi gas/vapor cartridges/filter Important assemblies can be used up to the Before using these filters, you NIOSH approval limits: must determine the following: 10 times the permissible 1. The type of contaminant(s) exposure limit (PEL) with for which the respirator is half facepiece, or being selected. 10 times the PEL with full 2. T he concentration level facepiece qualitatively fit of contaminant(s). tested, or 3. W hether the respirator can be 50 times the PEL with full properly fitted on the wearers facepiece quantitatively fit face. Do not use with beards, For more information, please contact: tested, or on other facial hair, or other 3M Occupational Health and conditions that prevent a good the maximum use concentration Environmental Safety Division seal between the face and the allowable in applicable OSHA (OH&ESD) faceseal of the respirator. standards, whichever is lower. In the U.S., contact: 4. Before use of these respirators, Customer Service 1-800-328-1667 a written respiratory protection Technical Assistance program must be implemented, 1-800-243-4630 Website meeting all the requirements www.3M.com/OccSafety of OSHA 29 CFR 1910.134, For other 3M products including training, medical 1-800-3M HELPS evaluation and fit testing. In Canada, contact: 3M Canada Company, OH&ESD P.O. Box 5757 London, Ontario N6A 4T1 Customer Care 1-800-364-3577 Technical Assistance (Canada only) 1-800-267-4414 Website www.3M.ca/safety Technical Assistance In Mexico 01-800-712-0646 Occupational Health and Environmental Safety Division 5270-2255, 5270-2119 (Mexico City only) Technical Assistance In Brazil 3M Center, Building 235-2E-91 0800-132333 St. Paul, MN 55144-1000