3M MetPak 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series End-to-end stackable Offset dual-beam contact minimizes insertion force Expanded pin counts Protective Push-Cap Monoblockable Press or heat stake peg 12 mm modular units Meets global IEC 61076-4-104 Futurebus+ standard See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: September 17, 2013 TS-1115-D Sheet 1 of 4 Physical Insulation: Material: High Temp LCP Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 50 (1.27 m) Nickel Wiping Area: See Ordering Information Solder Tails: See Ordering Information Electrical Signal: 1.5 A - All contacts simultaneously Current Rating: 3 Insulation Resistance: 10 M 1,000 V Withstanding Voltage: AC Environmental -55 C to 125 C Temperature Rating: Process Temperature Rating: 260C (Profile per J-STD-020C) 1 (per J-STD-020C) Moisture Sensitivity Level: MetPak is a trademark of 3M Company. Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE) UL File No.: E68080 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M MetPak 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series 21.0 .83 12.45 .490 1.00 .039 9.30 .366 11.80 .465 TAIL LENGTH X 13.50 2 1 .531 2.00 6.00 .079 POST LENGTH .236 TYP. 2.00 TYP079 4 ROW PRODUCT 23.0 .91 12.45 .490 ROW mm E (Inch) 11.30 D Tolerance Unless Noted .445 C 13.80 0 0.0 0.00 FOR SPECIAL MONOBLOCKS .543 B mm 3 0.3 0.13 CONTACT 3M SALES A ( ) Dimensions used for REPRESENTATIVE Reference Only 1.00 .039 5 ROW PRODUCT 8.00 .315 Note: 1. Refer to IEC 61076-4-104 Futurebus+ global standard. 2. Press Fit describes a contact tail having a compliant section designed to make a reliable electrical connection with a plated through-hole (PTH) in a printed circuit board, typically a back plane. Ordering Information MP2 - SXXX - X1XX - X - XXXX Plating Options: Contact Count (See Table 3) (See Table 1) C = Capped Solder Tail Blank = Press-Fit Termination Style Tail Length Rows M = Solder Tail (Press Peg) (See Table 2) 4 = 4 Rows (press peg requiring arbor press for PCB assembly) 5 = 5 Rows (Contact 3M Sales Rep) P = Press Fit (w/ Tail Cover) TS-1115-D Sheet 2 of 4 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions