3M MetPak HSHM Press-Fit Socket
2 mm Type A, 110 Signal Contacts, 5 Rows, Right Angle HSHM Series
Up to 5 Gb/s data rates
Low crosstalk at high frequencies
50/100 (single-ended /differential) impedance
Modular/scalable format IEC 61076-4-101
63 mated lines per linear inch
Mates with 3M MetPak HSHM headers
Dual beam contact construction for high reliability
Multi-purpose center (MPC) for keying and guidance
End-to-end stackable with 5 row 3M MetPak CP2,
HM and HSHM sockets
See the Regulatory Information Appendix (RIA) in
the RoHS compliance section of
www.3mconnector.com for compliance information
Date Modified: October 7, 2010 TS-2025-B
Sheet 1 of 3
Physical
Insulation Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0
Copper Alloy
Contact Material:
Plating: See Ordering Information
Performance
Mechanical:
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.74 N [75 g] Shield
Engagement Force (Nominal): 0.32 N [33 g] Signal, 0.22 N [22 g] Shield
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.20 N [20 g] Shield
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.57 mm [0.062 in] Shield
Mate/Unmate Cycles: 250
Application: This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101)
Electrical:
Data Rate: 5 Gb/s
Characteristic Impedance:
50 Single-ended, 100 Differential
Current Rating (Fully Loaded): 1 A @ 70C Signal
4
Insulation Resistance:
10 M @ 100 V
DC
Withstanding Voltage: 750 V
RMS
Environmental
Temperature Rating:
-55 C to 125 C
UL File No.: E68080 MetPak is a trademark of 3M Company.
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions
3M MetPak HSHM Press-Fit Socket
2 mm Type A, 110 Signal Contacts, 5 Rows, Right Angle HSHM Series
HSHM-SXXXXX-5AP1-XXXXX
REV X XXYY
50.00
1.969
48.00
1.890
20.40
2.00
.803
.079
E
D
11.40
10.95
C
.449
.431
B
A
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
2.00
2.00 3.70
1.00
.079
.079 .146
.039
2.00
.079 46.00 3.30
8.80
.130
1.811
.346
2.80
10.70
.110
.421
mm
(Inch)
Tolerance Unless Noted
0 0.0 0.00
mm 3 0.3 0.13
[ ] Dimensions for
Reference Only
Ordering Information
HSHM-S110AX - 5AP1- XXXXX
Plating m [ ]:
High Speed Option:
TG30 = 0.76 [30] Min. Au Contact Area
1 = Row differential applications 2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
4 = Coaxial and column differential applications
Standard Option
TG30L = 0.76 [30] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Typically higher make order quantities as compared to TG30.
TG50 = 1.27 [50] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Non-Standard Option (Available with longer lead times and
higher make order quantities, MOQ)
TS-2025-B
Sheet 2 of 3
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronic Solutions Division
800-225-5373
Interconnect Solutions